Kostenlos
Unterstützung
To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.
Sexy Deep V Printed Criss Cross Backless Bikini
Package Included:1 x Car PurifierOr2 x Filter DescriptionThis purifier helps remove formaldehyde and odor and keep the air fresh. Bring you a fresh. It is designed to be compact. Its small size makes it easily portable for use inside the home or car.Specifications: ColorBlack, WhiteMaterialABSProduct Size16x16x37 cmFilter Size22x11x3.8cmVoltage5VPower2WPower outletUSBFeatures:SolarUSB charging,Convenient and easy to use.Remove formaldehyde, dust, smoke and keep the air fresh.HEPA Filter absorbs harmful gases and refreshes your airGreat for office, study, bathroom, closet and working places. Its small size makes it easily portable for use inside the home or car. Caution: Read Before you Buy #1: Only Filter*2 #2: White Car Purifier #3: Black Car Purifier
Specification:Product Name: Motorcycle HeadlightHouse Color: Chrome / BlackLight Source: WhiteBeam: High/Low Beam ConversionMaterial: PlasticLighting Part Type: HeadlightPlacement on Vehicle: FrontWorking Voltage: DC 12VHousing depth: 150mmLens width x height: 75 x 75mmMount: bottom mountQty: 1pcWiring Connection:Black Wire(-): GoundWhite Wire(+): Hi- Beam White LightRed Wire(+): Low- Beam White LightFeatures:Super bright LED front headlightRubber mounts to prevent vibration and fits choppers with bottom mount bracketsChrome ABS Plastic housing and Glass Lens3-wires connectionNo installation instructions includedPackage Included:1x LED Chrome Bullet Headlight
Material
breathable mesh cloth
Comfort
Held Clip-in Technology
Safety
Air-Bag, certified, unfolds completely within 0,1 seconds rib protector pocket for optional
Shipping info airfreight Due to the safety regulations in the airfreight, we have to remove the gas cartridge of this article for shipping outside the European Union. Upon receipt of the product, you can use any commercially available 60cc or 100cc gas cartridge to restore the function of the airbag.
Features:-Super bright flashing light, Power by 6 high intensity LEDs w/ optical lens.-Low Consumption and long life.-Different flashing patterns and last pattern memory recall.-Affordable strobe lights for your exterior grille.-Faster on/off response time.-Easy to install.(instruction is not included)Specification:-Shell color: as pictures show-Bulb Type: LED-Lighting Type:strobe-Light color: yellow,white,blue,white+yellow-Number of LED: 6-Voltage: 12V DC-Power:6W ( 1W/LED )-Cable length:approx. 140cm-Size:as picture showsPackage Includes:1 x 6 LED Car Strobe Flash Light
