Kostenlos
Unterstützung
Spidi Arbeiter Tex ist die perfekte Mischung aus Stil und Motorrad-Geschichte. Zeichnet sich durch eine kurze und schlanke Schnitt, ist mit einer feinen 250 gr Polyester, mischen die Bedürfnisse der Fahrer Sicherheit zu den natürlichen Touch ein hochwertiges Material zugeschnitten.Technische Merkmale:250 g Polyester Mesh-Innenfutter Die Polsterung besteht aus 150gr/qm Hohlfaser Watte Thermal Wasserdichte und atmungsaktive H2Out Membran abnehmbare Step-In Bekleidungssystem Samt gefüttert am Hals EN1621 -1 zertifiziert Forcetech Schutzvorrichtungen an Schultern und Ellbogen Bereit für zurück Krieger Rückenprotektor zertifiziert EN1621-2 Lev 1 und Level 2 Bereit, Brust und Brustkorb Krieger Protektoren zertifiziert prEN1621-3 Dynamische Öffnungen Aufnahme auf der Brust Luft-Extraktoren auf der Rückseite 5 Außentaschen Anpassung Bänder an den Seiten und Ärmeln Produktgewicht: kg. 2,50
Animiet durch das Ziel, Motorradfahren praktischer zu gestalten, entwickelte Roof einen neuen Helm, den ROOF DESMO, erster Integralhelm zu 100% modulabel.Mehrere Jahre im Entwicklungszentrum in Südfrankreich waren nötig für die Entstehung diese Models RO31, einer wirklichen Innovation, geschaffen, durch die Verbindung der ureigenen Traditionen bei ROOF, Sicherheit, Ergonomie und Design.Der Roof DESMO leitet eine neue Ära für Modulhelme mit hoher Sicherheit, Komfort und einfacher Bedienbarkeit ein.Zertifizierung als Jethelm und Integralhelm E22-05 J und P Top Venturi Lufteinlässe Kinnteil mit Luftzirkulation effiziente Abdichtungen schützen bei jeder Witterung abnehmbares und waschbares Innenfutter Visier mit Anti-Fog und Anti-Scratch BeschichtungPROGRESSIVER SCHUTZDoppeldämpfung durch progressive Dichte der Innenschale für einen kontrollierten Schutz. Das Luftkanalsystem erlaubt eine umfassende Belüftung des Kopfes. Ein belüfteter Schutz!TWIN DESMO TECHNOLOGIEDie Bewegung des Kinnteils kontrolliert automatisch die Bewegung des Visiers, welches sofort die Position für die jeweilige Konfiguration einnimmt, dicht abschließend als Integral und exklusiv für den offenen Jet, wofür das Visier näher zum Gesicht geht um Turbulenzen zu minimieren Visier offen oder geschlossen - alles ist möglich. DESMO: 2 Helme in einem!LUFTEINLASS VENTURIDie Lufteinlässe per Depression vorn und oben gewährleisten eine sehr angenehme Belüftung des Kopfes und im Gesichtsbereich. Die Intensität der Belüftung ist mit einer Hand regulierbar. Lassen Sie den Wind ins Haar!DUAL-DICHTUNGDie perfekte Dichtheit des DESMO wird durch Verwendung von zwei exklusiven Dichtungen von ROOF erreicht, welche zugleich durch Kompression und darüber gleitend, abdichten. Eine Lippendichtung am Helm und eine zweite Dichtung aus speziellem Schaumstoff, welche immer wieder automatisch in die Ursprungsform zurück geht, am Kinnteil. Fordern Sie den Regen heraus!DEFLEKTIVE BELÜFTUGEin Deflektor leitet bei Bedarf die Luft direkt auf die Innenfläche des Visiers und ermöglicht so eine schnelle Beseitigung von Beschlag. Sie ist dadurch sehr effizient bei unterschiedlichen Wetterbedingungen. Atmen Sie, Sie dürfen!EINHAND DESMOVERSCHLUSSDer Verschlussmechanismus ist sicher und ergonomisch. Verschluss des Kinnteils durch einfaches Herunterklappen in Position Integral. Öffnen durch gleichzeitiges Drücken der übereinander angeordneten Druckknöpfe. Eine Hand genügt, um von Position Jet zu Integral und wieder zurück zu wechseln. Behalten Sie die Kontrolle!3D KOMFORTInnenfutter, Wangenpolster, Nackenring und Windabweiser aus belüftetem 3D-Stoff, demontierbar, waschbar und adaptierbar an Ihre Kopfform für einen sehr hohen Komfort. Sie werden Ihn nicht mehr absetzen wollen!
Specification:-Type:Front Diamond Style Grille Grill-Material: High quality ABS-Color:Glossy Black-Style:Diamond Style look-Placement on Vehicle:Front, Upper-Fitment Type:Direct ReplacementFeatures:-Made Of Excellent Quality ABS.-Perfect fitment with no modification required.-Gives your vehicle a new style and appearance.-Accentuates your vehicles overall look.-A great upgrade for your vehicle.-Provides better airflow to the radiator to help the cooling process better.-Please check the fitment carefully before buying.-No installation instruction included, professional installation is highly recommended!Fitment:-Only For Mercedes V class W447 V250 V260 2015-2018 (models without camera)(Only suitable for low-equipped models without camera)Notice: Not Fit For Benz Vito.Package Included:1 PCS Front Grille Grill(WITHOUT EMBLEM)
Specification:Color: BrownNo. of Cylinders: 1 CylinderDisplacement (ml): 50 150ccItem Type: EnginesModel Name: Valve Stem Oil SealFitment: Fits GY6 50-150cc Scooter Moped 139QMB, 152QMI 157QMJ etcNote:1. Please check the size if it matches your models before you purchase2. Pls allow 0.5-1 inch difference due to manual measurement.(1 inch=2.54cm)3. Instruction is not included,professional installation is highly recommended.Package Included:1 X Pair Valve Seal
Dichtes und geschmeidiges Kuh-Leder Leder mit Perforierung an Brust Lederstretch im hinteren Schulterbereich Stretch mit Faser-Verstärkung an den Innenarmen Herausnehmbare Weste ohne Ärmel als Winterfutter Außenprotektoren an Ellbogen und Schulter. Racingkragen Nackenabdeckung mit Neopren Weitenregulierung mit Klett und Reiβverschluss an den Handgelenken 2 Außentaschen 2 Futtertaschen 2 Innentaschen 360° umlaufende Reiβverschlussverbindung in Taillenhöhe Reiβverschlussverbindung am Rücken
MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr
