Denso Flashing Tape Primer is a brush applied solvent-based primer, used for priming surfaces prior to the application of Denso Flashing Tape. Composition: Solution of oxidised bitumen in aromatic hydrocarbon solvent.Cleaning solvent: White spirit. Specifications:Drying time: 20 - 30 minutes. Covering capacity: 7 - 8m² per litre. Application temperature: 0°C to 55°C. Solids content: 58% of weight. Volume: 1 litre.
Faithfull Nail punch with a square head which provides a larger striking area and stops the punch rolling off the bench. Accurately hardened and tempered with a precision formed concave tip for better nail contact. Designed to drive nail heads below the surface of the wood.Point Diameter: 4.0mm (5/32in)Length: 100mm (4in)
High leverage compound cutting action snips made from forged alloy steel. Chrome Molybdenum construction with serrated cutting edge to prevent slippage when cutting. The one handed automatic latch releases with the squeeze of the handles which are bi-material for extra comfort and grip. These snips cut up to 18 gauge steel and are suitable for cutting aluminium, sheet uPVC, wire mesh, leather, copper and plastic. Size: 250mm (10in).1 x Stanley Yellow Long Aviation Snip Straight Cut 250mm (10in)
Bahco 1-476 4in Key Files have a handle developed according to the scientific ERGO™ process. This set is perfect for fine filing and polishing jobs. The set contains one of each handled file: hand, warding, square, three square, half round and round. Supplied in a snap-shut plastic wallet with hanging hole. Type of cut: 3 Smooth.Blade Length: 100mm.
The ABUS E60 Euro profile half cylinders are suitable for switch gear & garage doors They have precision, mushroom pin and paracentric keyway which offer comprehensive anti-pick protection, also they have a hardened steel anti-drill spring & pin protection with 8 anti-drill pins in every keyway. For emergency and convenience feature the outside key can operate the lock with internal key in place. How to measure a Euro Profile Cylinder: Distance from one end of cylinder to centre of cam
The Trend VJSAG36 is an adjustable angle guide to allow grooving with the router, or crosscutting with a circular saw. It has an adjustable angle range from 25º to 155º and preset angle for 30º, 45º, 60º, 90º, 120º, 135º and 150º. The router working length at 90º is 915mm (36 inch), the circular saw working length at 90º is 780mm (30 3/4 inch). It has an angle tolerance ± 0.2º with zeroing facility, adjustable position alloy extrusion with scale and requires three clamps. Will accept accessory friction clamps Ref. VJS/CK or VJS/CK/L.
