The Makita 9920 Belt Sander has the following features:- Variable speed control.- Constant speed under load.- High power for stock removal.- Flat top for inverted applications.- Dust bag.- Long cable for sanding runs.- Double insulated. Technical specifications:Belt Size: 76 x 610mm.Belt Speed: 210 - 440m/min.Power rating: 1,010 watt.Vibration sanding: 2.5m/sec².Vibration K factor: 1.5m/sec².Noise sound power: 96 dB(A).Noise sound pressure : 85 dB(A).Noise K factor: 3 dB(A).Net weight: 4.5kg. Supplied with:Abrasive belt.Cork/carbon pad.Dust bag.The Makita MAK9920 Belt Sander Variable Speed uses 240 volt.
Monument Clean & Polish Pads are suitable for cleaning, polishing, rust removal, scrubbing and blending. They are rust proof, washable and will not break up during use. Size: 50 x 250 mm pads, medium grit.
The Milwaukee M18 BRAID-0 Right Angle Impact Driver has a compact design and measures 307mm in length and a 53mm head design, making it ideal for working within confined spaces. The full metal gearbox and gears provide superior durability and maximum torque in even the toughest applications. There is a multi-handle design with an extended paddle switch for multiple grip positions and maximum comfort. The 1/4in Hex chuck provides quick and easy one handed bit change and there are 2 speed settings, that allow for a wider range of applications. REDLINK™ overload protection electronics in tool and battery pack deliver best in class system durability. Individual battery cell monitoring optimises tool run time and ensures long term pack durability. There is also a on board fuel gauge and LED light. Bare Unit, No Charger or Battery Supplied. Specification No Load Speed: 0-1,500/0-2,250/min.Impact Rate: 0-2,400/0-3,400/bpm.Max Torque: 41/81Nm. Weight: 1.8kg.
These Forgefix Carriage Bolts are Zinc Plated, and ideal for timber to timber joining. They come complete with a hex nut and are fully threaded to 100mm. Also known as 'Cup Square Hex Bolts', the square underneath the Cup stops rotation of the bolt when tightening. Conform to DIN 603 and DIN 934 standards. Available in a comprehensive range of sizes to suit most applications. APPLICATIONUsed mainly for fastening timber to timber and is extensively used for timber joist construction in house building and numerous decking applications. A Carriage Bolt, also known as a Coach Bolt or as a ‘Fully Threaded Cup Square Hex Bolt’, has a domed or countersunk head, and the shank is topped by a short square section under the head. The square section grips into the part being fixed (typically wood), preventing the bolt from turning when the nut is tightened. A rib neck Carriage Bolt has several longitudinal ribs instead of the square section, to grip into a metal part being fixed. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers.Carriage Bolt & Nut ZP M10 x 50 Bag 10
No air hose or compressor required. Eliminates the cost of fuel cells. Air/spring drive system means less recoil, better flush driving and easier maintenance. Fitted with a selective activation button; easily choose between sequential or bump fire mode. Also features tool-free adjustment of drive depth, a lock switch and 30 minute automatic shutdown for increased safety and longer battery life. The dry fire lockout system prevents nailer from driving when fasteners are low. Other features include a low battery indicator and pivoting rafter hook. Supplied with: 2 x 18V 5.0Ah Li-ion Batteries, 1 x Charger, 1 x Safety Glasses, 1 x Hex Wrench and 1 x Case
