Dymo Permanent Flat Surface Label Black On White 12mm

Listing Date:04/03/2023

Magnetic screwdriver bit holder for 1/4in shank screwdriver bits.

The Bosch Construct Timber Saw Blades are designed for Construction Site Timber which might include concrete residues or nails within the timber. Technical Specification: Blade Diameter : 190mm No. of Teeth : 12 Bore Size : 30mm Tooth Pitch : 2.6mm Tooth Shape : 12° POS Rake Max Rotation Speed : 8,000RPM

IRWIN Vise-Grip Groovelock Waterpump Pliers have an all-purpose jaw that can grip onto flat, round, hex and square work pieces. The multi-groove ratcheting system has twice the number of groove positions compared to traditional groove joint pliers. A press-n-slide button adjusts the jaws twice as fast as traditional groove joint pliers. Anti-pinch non-slip grips provide control, comfort, and less hand fatigue.These Irwin ;Vise-Grip Groovelock Waterpump Pliers have the following specifications: Capacity: 114mm.Length: 400mm (16in).

Theme:Pattern; Style:Fantasy; Material:Polyester; Features:Adorable,Machine wash; Shipping Weight:0.155; Net Weight:0.155; Listing Date:12/25/2020; Production mode:Self-produce; Size:25251

The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges. The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved.Length (A): 108mm (4.25 in).Blade length (B): 8mm (0.31 in). Head width (C): 10.5mm (0.41 in). Head depth (G): 15mm (0.59 in). Cutting capacity: 0.35-1.25mm. Head type: Double angled. Cutting edge: Flush. Angled heads, also known as oblique style, are set at an angle to the main body of the cutter. This means that the cutter can reach between parts and areas which are difficult to access. The Flush Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area – more than Micro-bevel cuts. The cutters have fine cutting edges that leave a narrow and short taper and small exposed area. They can be used to meet tight specifications for a flush result to a board, component or part.