Kostenlos
Unterstützung
Filamento PLA 1.75MM Filamentos de impresión 3D para impresora 3D 1 KG 1 carrete
The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges. The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved.Length (A): 108mm (4.25 in).Blade length (B): 8mm (0.31 in). Head width (C): 10.5mm (0.41 in). Head depth (G): 15mm (0.59 in). Cutting capacity: 0.35-1.25mm. Head type: Double angled. Cutting edge: Flush. Angled heads, also known as oblique style, are set at an angle to the main body of the cutter. This means that the cutter can reach between parts and areas which are difficult to access. The Flush Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area – more than Micro-bevel cuts. The cutters have fine cutting edges that leave a narrow and short taper and small exposed area. They can be used to meet tight specifications for a flush result to a board, component or part.
Type:Wine Rack; Material:Silicon; Compatibility:Kitchen; Features:Wear-Resistant; Listing Date:07/18/2023
Rapid No. 13 precision cut fine wire staples are made from high-performance stainless steel for strength and durability. The thin wire makes the fixed staple almost invisible, ideal for craft and textiles where the staple will have minimal effect on the fibres. Stainless steel wire classification class 2 AISI 304 ideal for outdoor use or use in humid areas. Type: 13 (stainless steel).Size: 6mm leg lengthQuantity: 2,500. For use with the Rapid MS610, R13, R83, R23, R30, R33, MS813, R19, ESN113 and R213 tackers.
These RIDGID Top Screw Bench Chain Vices are fitted with a crank handle that is firmly anchored to the base of the vice. It also features a pipe rest and bender. The heavy-duty cast iron base has jaws especially designed for gripping and bending pipes.RIDGID BC210 Top Screw Bench Chain Vice Capacity: 6-60mm (1/8 - 2.1/2in).Weight: 3.5kg.
These Roughneck Professional Bevel Edge Chisels have high quality, drop forged Chrome Vanadium blades for long life performance. The bevel edge blade has two cutting angles - 25° ground angle and a pre-honed 30° angle for immediate cutting. The chisels have contoured, comfortable handles for maximum control. These handles are made from impact-resistant polypropylene with a heavy-duty end cap for repeated striking. The blade tang runs through the handle for direct transfer of striking force to the cutting edge. The chisels are supplied with a blade guard for edge protection and user safety.Size: 32mm (1.1/4 inch).