100 Percent Accuri Enduro S18, goggles

Solid Color Simple Men's Casual Denim Jacket Short Paragraph Slim

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr

Description:Material: Grid, CottonSize: 53cm x 57cm/ 20.9'' x 22.4''Color: BeigePackage Include:1pc x Front Seat Cushion(Does not include back row)Features:1.Fit most car seats.2.Comfortable and soft material.3.Breathable mesh cloth.4.Health Keeper, useful to relieve fatigue, quicken metabolism and prevent bacteria.5.Suitable for drivers and office use.Notice:1.Please allow 1-3cm error due to manual measurement.Pls make sure you do not mind before you bid.2.The color may have different as the difference display,pls understand.

Every stitch of PRIME PRO racewear was designed with intent and purpose. Utilizing premium materials and detailed craftsmanship, PRIME PRO is our most advanced racewear to date. Built around the notion that unrestricted mobility, minimal weight and athletic fit all allow the rider to work more efficiently with the motorcycle, PRIME PRO is designed to reduce interference between man and machine. From concept to creation, PRIME PRO was developed with insight and testing from our elite riders to deliver next level performance. Bring a little slice of paradise to your ride. With an artist inspired “aloha” vibe, the Floral kit is sure to set you apart from the sea of monotony on the starting gate. Built on our signature PRIME PRO chassis, the Floral kit is made for hangin’ loose and getting pitted. Features
Hybrid fit with set-in style tailored sleeves Taped collar and cuffs Minimal seams for maximum comfort Fully ventilated arms and back panel Moisture wicking material keeps you dry Tail silicone print helps keep jersey tucked in Flat-stitched seams minimize irritation

Specification:-Type:Front Diamond Style Grille Grill-Material: High quality ABS-Color:Glossy Black-Style:Diamond Style look-Placement on Vehicle:Front, Upper-Fitment Type:Direct ReplacementFeatures:-Made Of Excellent Quality ABS.-Perfect fitment with no modification required.-Gives your vehicle a new style and appearance.-Accentuates your vehicles overall look.-A great upgrade for your vehicle.-Provides better airflow to the radiator to help the cooling process better.-Please check the fitment carefully before buying.-No installation instruction included, professional installation is highly recommended!Fitment:-Only For Mercedes V class W447 V250 V260 2015-2018 (models without camera)(Only suitable for low-equipped models without camera)Notice: Not Fit For Benz Vito.Package Included:1 PCS Front Grille Grill(WITHOUT EMBLEM)

Outer shell
highly abrasion-resistant kangaroo leather
Lining
breathable mesh inner lining (100% polyester) 3D mesh (100% polyester) at back
Fit/features
front air-vent zipper perforated leather panels Schoeller®-keprotec® stretch panels at arm, crotch & back of knee cuff in stretch material aerodynamic racing hump wooden knee sliders anti-slip pad in knee area for extra grip
Protection
EN 1621-1 CE-approved SAS-TEC® 3D shoulder & elbow protectors titanium protectors on shoulders, elbows & knees EN 1621-2 CE-approved SAS-TEC® back protector Soft protectors at neck, tailbone, hip and ribs Velcro for optional breast protector EN 1621-1 CE-approved height-adjustable SAS-TEC® 3D knee protectors Leather protector pockets for increased protection hard plastic reinforcement at forearm "engineered by Skill Skin track performance" schoeller®-keprotec® fibre panels located in back/knee/thighs and upperarm double leather reinforcement on seat double-stitched