Maul Magnet MAULpro (B x H x T) 53 x 18 x 10 mm rechteckig Grün 20 St. 6179155 (6179155)

Hauptmerkmale Netzwerk Ethernet LAN Datentransferraten 100,1000 Mbit/s Management-Funktionen Web-basiertes Management Ja Anschlüsse und Schnittstellen Anzahl Ethernet-LAN-Anschlüsse (RJ-45) 2 Gewicht & Abmessungen Abmessungen (BxTxH) 442 x 406 x 88,9 mm Gewicht 9,1 kg Energie Stromversorgung 138 W Eingangsspannung 90 - 260 Betriebsbedingungen Temperaturbereich in Betrieb 0 - 55 °C Temperaturbereich bei Lagerung 10 - 75 °C Luftfeuchtigkeit in Betrieb 0 - 95% Luftfeuchtigkeit (außer Betrieb) 0 - 95% Technische Details Sprachcodec G.168,G.711,G.722.2,G.723.1,G.726,G.728,G.729,G.729ab Anzeige LED-Anzeigen Ja Stromversorgungs-LED Ja Zertifikate Zertifizierung UL/CSA 60950, CSA C22.2, FCC Part 15:2009, EN55022:2006, EM60950, EN61000, ETS 300 386

New exclusive formula: High performance: repositionable for up to 15 seconds.Solvent free and low odour.Non-drip gel formula.Ultra strong bond. Can be used on metal, most plastics**, wood, paper, cardboard, rubber, leather fabric, ceramics and porcelain. Limitations of use:**Except polyethylene and polypropylene - for these plastics use Loctite All Plastics. Not suitable for repairing items that contain hot liquids (e.g. cups mugs etc.) or items that will be continuously wet in service. For interior use only. Leather may become hardened or discoloured. Not suitable for very soft leather. WARNING: READ INSTRUCTIONS CAREFULLY. HOLD AWAY FROM THE BODY DURING USE. USE IN A WELL VENTILATED AREA. PROTECT CLOTHING AND SURROUNDING AREA. SQUEEZE TUBE GENTLY. Ensure surfaces to be bonded are clean, dry and close fitting.Lightly dampen porous surfaces. Screw nozzle onto tube to pierce. Unscrew cap. Apply a tiny amount of Loctite Super Glue to one surface only. Put surfaces together, reposition if necessary and hold for at least 30 seconds. Allow at least one hour before use, and check well bonded. After use: Before replacing cap, lightly sap the base of the tube on a flat surface to empty the nozzle. Wipe nozzle with a tissue dipped in Loctite Glue Remover or nail varnish remover. Replace cap and store upright in a cool dry place.