Un guide de cyclisme sur le canal de la Garonne en France, décrivant 296 km de piste cyclable de Bordeaux à Toulouse, où elle rejoint le canal du Midi. Décrit une excursion de 135 km partant l'océan Atlantique, avec des détours vers de nombreuses...
Farbiges Wachsornament Chrysantheme, ca. 7 x 7 cm, geprägt. Mit unseren Wachsornamenten können Sie ganz einfach Kerzen selbst gestalten oder verzieren. Dazu das Wachsornament mit Handwärme auf einem Kerzenrohling oder anderen Wachsuntergründen, wie z.B. unseren Wachsplatten, platzieren. Für eine besonders starke Haftung empfehlen wir Wachs-Haftis.
Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 3.1 Length 90 28° Collation AngleSKU S310R90 Profile RING Finish BRIGHT Description STICK NAIL 3.10-90 RING 2M Qty per box 2000Will also fit the N80SB, FW28WW-E, N100S
Rustins White Undercoat is a high quality oil based undercoat, suitable for all interior and exterior woodwork. Should be used over Rustins white or pink primers.Rustins White Undercoat. Size: 500 ml.
Archivo de trastes de guitarra portátil Herramienta de borde de arce duro Herramientas de pulido profesionales para guitarras Trastes Accesorios de mantenimiento de guitarra
Kinder T-Shirt, schwarz, kurze Ärmel, Größe 128. Aus 100% Baumwolle. Waschbar bei 40°C. Ideal zur Textilgestaltung. Maße des T-Shirts: ▪ Von Schulter zu Schulter: ca. 34 cm ▪ Breite: ca. 38,5 cm ▪ Länge: ca. 53,5 cm ▪ Ärmeldurchmesser: ca. 12 cm Hinweis: Die Kinder-T-Shirts fallen groß aus, bitte beachten Sie die Maßangaben.
