Irwin Jack Xpert Tenon Saw 300mm 12in X 12T

Bahco Half Round Cut File with a tapered half round cross section to allow use on convex and concave surfaces. The edges and surfaces are tapered towards the point. It has a double cut surface, and it suitable for deburring work. Smooth Cut: Approx 62 teeth per 25mm (Fine).Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size 100mm (4in)Cut: half round bastard.Tanged.

Paslode IM350+ Diamond point clipped head Nail packs with paper strip, supplied with Paslode Special Impulse gas fuel cells.FINISH: All Paslode nails are Chrome 6, cadmium and lead free and are available in five finishes to meet corrosion requirements.Bright: Economy and bright nails meet the Eurocode 5 requirements for applications in service class 1 (indoor) Specification - No coating.Galv Plus : Meet the Eurocode 5 requirements for applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn / Al alloy approx 15µm.Electro Galv : Meet the Eurocode 5 requirements for all applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn and chromate minimum 7µm.Hot Dipped Galv : Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - Zinc coating minimum 50µm Stainless Steel : Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - A2 according to AISI 304, and A4 according to AISI 316.SHANK: Smooth Shank: The standard nail, offering high shear value and lowest withdrawal resistance. Fixing across the grain. Fixing into end grain. Clenching applications. Specification - Number of centres will vary with shank diameter.Unilock Shank : Increases withdrawal resistance. Drives easier than ring shank fixing across the grain. Specification - The ringed parts have 24 rings per inch.Ring Shank : Provides the highest withdrawal resistance. Fixing across the grain. Specification - RPI (Rings Per Inch) vary from 16 to 32 depending on Specification.HEAD TYPES :Round Head : The head area is designed to maximise resistance to the head being pulled through Specification - Head size between 2.0 and 2.5 times wire diameter according to EC5Clipped Head : Increases number of nails per strip. The head area is designed to maximise resistance to the head being pulled through Specification - Head area corresponding to full round head area, according to EC5

The Makita DUB362 Brushless Blower has been developed as the most powerful cordless blower with a brushless motor for increased runtime, high air volume and speed. Powered by two 18 Volt Li-Ion batteries (NOT SUPPLIED) in series to supply energy to the powerful 36 Volt DC motor drive system. Has a lightweight, compact design for single handed operation with a lock on function, the button is operable from either side of handle. 6-stage air volume/velocity settings via a dial with variable speed control by trigger. Supplied with a 3-stage telescopic long nozzle that has an adjustment range of 100mm. Bare Unit, No Battery or Charger Supplied. Specification Max Air Flow: 27/54m/s. Air Speed: 11,400/21,500/min. Max Air Volume: 6.9/13.4m³/min. Weight: 1.4kg.

A3 Laser Machine DIY Desktop Mini Laser Engraver DIY Laser Grabadora Máquina Cortadora Impresora

For use on oily, slick, wet, cold or dry surfaces, this non-toxic, waterproof crayon is ideal for timber, concrete, ceramics and metal.Card of 2Colour Red

The Knipex 26 21 200 bent long nose side cutters have long flat round jaws that are highly loadable, with elastic precision points with blades for hard wire diameter up to 2.2mm and medium wire diameter up to 3.2 mm. The cutting edges are separately induction hardened for durabilty and longer working life and are hardend to approximately 61HRC. The jaws are angled at 40° and are ideal for use on electronic or tight to reach areas on computers, circuitry, or motor vehicles applications. Knipex have used a good quality special tool steel material that is oil hardened. Dipped handles.The Knipex 26 22 200 bent long nose side cutters have Bi-material, 2-component handles for a more comfortable and positive grip. They have long flat round jaws that are highly loadable, with elastic precision points with blades for hard wire diameter up to 2.2mm and medium wire diameter up to 3.2 mm. The cutting edges are separately induction hardened for durabilty and longer working life and are hardend to approximately 61HRC. The jaws are angled at 40° and are ideal for use on electronic or tight to reach areas on computers, circuitry, or motor vehicles applications. Knipex have used a good quality special tool steel material that is oil hardened. Hard wire diameter: 2.2 mm.Medium wire diameter: 3.2 mm.Hardness approx. 61HRC.Length. 200 mm.