Faithfull Aluminium Rule 1 Metre 39in

The Faithfull TCT Paint Scrapers are ideal for removing paint, varnish and other coatings from wood. Tungsten Carbide blades are extremely hardwearing and will outlast steel blades by up to 100 times. The aluminium shaft is fitted with a comfortable soft-grip handle with an internal storage compartment for spare blades.The Faithfull FAIWSTCT50 TCT Scraper has the following specifications:Blade width: 50mm.Overall length: 275mm.

Ryobi EMS190DCL Cordless Mitre Saw has a compact cordless design that is portable and versatile. Has a user guide for repeat and accurate cutting. Up to 69 cuts in 1in x 4in white pine (using fully charged 18V 2.4Ah battery) Bare Unit (Batteries sold separately, compatible with all Ryobi One+ Batteries). Specification Bevel Capacity: Left: 45°.Blade Diameter: 190mm, 24 tooth TCT.Mitre Capacity Left/Right: 45°/45°Weight (With Battery Pack): 7.43kg.

Master Lock classic brass padlocks are a tough and reliable security solution. The solid brass body has a modern diamond shaped design and a brushed finish. The extensive range of brass padlock options means there is a Master Lock brass padlock for just about any need. Each padlock has a solid body, hardened steel shackle and dual locking levers. A variety of multi-pack options, where all padlocks in the pack open with the same key (keyed alike) is also available. Padlocks are available with 4-pin, 5-pin or 6-pin cylinders and with a variety of shackle lengths for added security and for a wider range of possible application options. All Master Lock padlocks are supplied with a minimum of 2 keys and a Lifetime Warranty against mechanical failure. Suggested Uses: Gates, containers, storage units and sheds.The Master Lock 160EURD has the following specifications: 60mm solid brass padlock - 30mm hardened steel shackle, 9mm diam. - 5-pins

10 Unids Mini Tamaño 12x5mm Tierra Rara Neodimio Magnety Fuerte-magnético para Whiteboard Refrigerador DIY Artesanía Ciencia y Oficina uso

The DEWALT DCK206M2 Twin Pack, contains the following: 1 x 18 Volt DCH253 3 Mode SDS Hammer Drill that is ideal for drilling anchors and fixing holes into concrete, brick and masonry from 4mm to 24mm. The hammer drill has a rotation stop mode for light chiselling in plaster, tiles and render and an impact stop mode for rotary only drilling in wood and metal. It uses 4.0Ah 18 Volt Lithium Ion batteries to deliver high performance, long life and maximum runtime. No Load Speed: 0-1,200/min.Impact Rate: 0-4,500/min with 2.1 Joules.Capacity: Concrete: 24mm, Steel: 13mm, Wood: 26mm.Weight 3.1kg. 1 x 18 Volt DCD785 XR Compact Hammer Drill Driver has an ultra compact, lightweight design that allows it to be used in confined spaces, whilst the intelligent trigger design allows for total control of application. It has a two speed, all metal transmission for increased run time and a longer tool life. Chuck: 13mm Keyless.No Load Speed: 0-600/0-2,000/min.Impact Rate: 0-10,200/0-34,000/bpmTorque: 60Nm, 14 Settings.Capacity: Steel: 13mm, Masonry: 13mm, Wood: 38mm 1 x 10.8-18 Volt DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LEDindicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-Ion DEWALT Slide Pack 10.8, 14.4, and 18 Volt batteries.

Hand Cut File for filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work on high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Double cut on both sides - with one safe edge (a safe edge permits work in corners). Parallel sides but slightly tapered in thickness. Smooth Cut: Approx 62 teeth per 25mm (Fine).Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size 300mm (12in)Cut: hand bastard.Tanged.