Faithfull Joiners Hammer 12oz

It also has a belt clip for handy storage. Suitable for charging mobile devices such as mobile phones, smart tablets, etc.

The Faithfull Long Leg Tile Spacers are ideal for most tiling applications. These versatile spacers can be easily snapped when ‘T’ joints are required and may be easily removed once the adhesive is set. How to use: Apply adhesive with a notched edge spreader and secure tile firmly. Position one spacer at each corner of the tile, add more spacers as each new tile is placed alongside. For evenly spaced wall and floor tiles, always use same spacer brand and product code during tiling process. Tiles must be left to set for 24 hours before grouting. Faithfull recommend removing spacers once tile adhesive has set. Please note: Size of spacer may vary slightly to dimension stated. Always use same spacer brand and product code during tiling process as each brand and product is different.Size: 3mm.Pack: Tub of 1,000.

The Faithfull Notched mastic trowel which is specifically designed for the application of adhesive prior to the setting of tiles. The 3mm V notched blade is ideal for applying wall tile adhesive and the two straight edges for finishing and cutting off. The blade is made from carbon steel for durability and a long working life and is fitted with a full size soft-grip handle for user comfort. Blade size: 280mm x 115mm (11 x 4.1/2in).V Notches: 3mm.

Maximum quality and stability thanks to metal gearbox head and consistent use of ball / needle bearings. Powerful 250 W FEIN high-power motor designed for continuous use. Convenient accessory changes without the need for extra tooling with the QuickIN clamping system. Electronic speed setting.|Optimum handling thanks to soft grip zone. StarlockPlus tool mounting with outstanding torque transfer, suitable for all Starlock and StarlockPlus accessories. Wide range of accessories available for all applications.

The Einhell Power-X-Change Combi & Impact Driver Twin Pack, contains the following: 1 x 18 Volt TE-CD 18-2 Li-i Power X-Change Combi Drill is a powerful and versatile tool for screwdriving, drilling and hammer drilling jobs. It has a robust, long-lasting 2-speed metal gear box for high torque and torque slip coupling that prevents over tightening of screws. Chuck: 13mm Keyless. No Load Speed: 0-320/0-1350/min. Max Torque: 48Nm 25 Settings. Capacity: Concrete: 15mm. Weight: 1.76kg. 1 x 18 Volt TE-CI 18 LI Power X-Change Impact Driver is fitted with a unique triathlon motor that is powerful and efficient for the highest demands in power-sapping screwdriving jobs. The special impact mechanism eliminates any torsion force on the user’s wrist. Short, lightweight design with ergonomic soft-grip surfaces and a rugged aluminium housing with additional rubber supports for increased protection. Bit Holder: 6.35mm (1/4in). No Load Speed: 0-2,300/min. Impact Rate: 0-3,200/bpm. Max Torque: 140Nm. 1 x 18 Volt Power-X-Change Charger that features a 6-step charging condition display and is ready for wall-fastening. The charger uses an intelligent charging-management-system for long battery life (battery status will be constantly checked and accordant loaded, a deeply discharged battery will be charged in repair mode). Input Power: 240 Volt. Output Voltage:21 Volt. Charging Time: 1.5Ah: 30 min, 3.0Ah: 60 min, 5.2Ah: 130 min. Weight: 0.5kg. Also comes with 2 x 18 Volt 1.5Ah Power X-Change Li-Ion Batteries and 1 x Toolbag.

The Britool 1/2 inch drive 12-point sockets (metric) are crafted from chrome vanadium steel and finished in high chrome. The OGV® profile allows tightening torque to be applied to the sides rather than to the angles of the nut. This product is for manual use only. ISO 2725-1, DIN 3124, ISO 1174-1, ISO 1711-1, ISO 691.The Britool BRIE117065B Socket 12 Point Standard 1/2 inch Drive 22mm has the following dimensions:Size: 22mmLength: 40mmWeight: 118g