Kurzinfo: Leitz iLAM Home Office A4 - Laminator - Heiß- oder Kaltlaminierer - Beutel - 23 cm Gruppe Laminators Hersteller Esselte Hersteller Art. Nr. 73680064 EAN/UPC 4002432112951 Produktbeschreibung: Leitz iLAM Home Office A4 - Laminator - Beutel Gerätetyp Laminator - Beutel Technologie Heiß- oder Kaltlaminierer Maximale Breite 23 cm Max. Dicke 0.6 mm Motorisiert Ja Dicke des Laminiermaterials 80-125 µm Ausführliche Details Allgemein Gerätetyp Laminator Breite 37 cm Tiefe 12.5 cm Höhe 7.5 cm Gewicht 1.25 kg Montage und Laminieren Technologie Heiß- oder Kaltlaminierer Maximale Breite 23 cm Maximale Geschwindigkeit 31 cm/Min. Maximale Größe A4 Max. Dicke 0.6 mm Motorisiert Ja Dicke des Laminiermaterials 80-125 µm Aufwärmzeit 3 Minuten Automatische Abschaltung Ja Farbe Green Metallic Merkmale Staufreigabetaste Energieversorgung Max. Energieverbrauch 285 W Nennspannung Wechselstrom 230V
Reinforced connecting hose to fit grease guns with a 1/8in BSPT thread. Grease hoses allow access to nipples with a limited reach. Due to their flexible construction, these are used for greasing hard to reach places. Fitting are zinc plated and hydraulically crimped on to the hose giving a working pressure of up to 5,800psi - 400bar. Fits Faithfull grease guns FAI GGHD and FAI GGMP, and other greese guns with a 1/8in BSPT thread and working pressure not exceeding 5,800psi - 400bar.450mm (18in) reinforced connecting hose to fit Grease Guns FAIGGHD & FAIGGMPSize: 450mm (18in)
New exclusive formula: High performance: repositionable for up to 15 seconds.Solvent free and low odour.Non-drip gel formula.Ultra strong bond. Can be used on metal, most plastics**, wood, paper, cardboard, rubber, leather fabric, ceramics and porcelain. Limitations of use:**Except polyethylene and polypropylene - for these plastics use Loctite All Plastics. Not suitable for repairing items that contain hot liquids (e.g. cups mugs etc.) or items that will be continuously wet in service. For interior use only. Leather may become hardened or discoloured. Not suitable for very soft leather. WARNING: READ INSTRUCTIONS CAREFULLY. HOLD AWAY FROM THE BODY DURING USE. USE IN A WELL VENTILATED AREA. PROTECT CLOTHING AND SURROUNDING AREA. SQUEEZE TUBE GENTLY. Ensure surfaces to be bonded are clean, dry and close fitting.Lightly dampen porous surfaces. Screw nozzle onto tube to pierce. Unscrew cap. Apply a tiny amount of Loctite Super Glue to one surface only. Put surfaces together, reposition if necessary and hold for at least 30 seconds. Allow at least one hour before use, and check well bonded. After use: Before replacing cap, lightly sap the base of the tube on a flat surface to empty the nozzle. Wipe nozzle with a tissue dipped in Loctite Glue Remover or nail varnish remover. Replace cap and store upright in a cool dry place.