This Surform® will plane all types of wood, aluminium, copper, plastic and laminates.It has a polypropylene handle and die-cast body for strength and durability and is fitted with a standard cut 250mm (10in) blade.Overall length 315mm (12in).
The Einhell Power-X-Change Starter Kit, contains the following: 1 x Power-X-Change 18 Volt Charger that features a 6-step charging condition display and is ready for wall-fastening. The charger uses an intelligent charging-management-system for long battery life (battery status will be constantly checked and accordant loaded, deeply discharged battery will be charged in repair mode). Input Power: 240 Volt.Output Voltage: 21 Volt.Charging Time: 1.5Ah: 30 Min, 3.0Ah: 60 Min, 5.2Ah: 130 Min. Weight: 0.5kg. 1 x Power-X-Change 18 Volt 2.0Ah Li-Ion Battery that features a 7-in-1 ABS: Active Battery Management System and a 3-Step LED battery control. The microprocessor controls key parameters like temperature, voltage and even a deeply discharged battery can be charged in repair mode which offers a long working battery life. The high quality Li-Ion battery cells provide nearly no self discharge and the rubber coated housing gives high impact protection and a high grip. It also has a recessed grip that ensures good ergonomic handling. Battery Type: Li-Ion.Voltage Supply: 18 Volt.Battery Capacity: 2,000 mAh.Product Weight: 0.4kg.
The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges. The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved.Length (A): 108mm (4.25 in).Blade length (B): 8mm (0.31 in). Head width (C): 10.5mm (0.41 in). Head depth (G): 15mm (0.59 in). Cutting capacity: 0.35-1.25mm. Head type: Double angled. Cutting edge: Flush. Angled heads, also known as oblique style, are set at an angle to the main body of the cutter. This means that the cutter can reach between parts and areas which are difficult to access. The Flush Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area – more than Micro-bevel cuts. The cutters have fine cutting edges that leave a narrow and short taper and small exposed area. They can be used to meet tight specifications for a flush result to a board, component or part.
These Forgefix Phillips, single thread Drywall Screws have a black phosphate finish for increased durability. The screws come complete with a Phillips No.2 insert bit. Their Bugle Head allows the screw to sink effortlessly into the dry lining without the need for countersinking, which in turn minimises the damage to the surface. APPLICATION:Designed for fitting dry linings to studding. Phosphate coatings are made up of thin crystalline layers of phosphate compounds that adhere to the surface of the fixing or fastener. The phosphate crystals are porous and can be formed from zinc, manganese, or iron phosphate solutions. Phosphate coatings offer good corrosion resistance and have an excellent ability to absorb supplementary coatings which improves appearance, corrosion resistance and resistance to abrasion. The Phillips screw has four simple tapered slots. It is designed so that a Phillips tip screwdriver can turn a Phillips screw with increasing torque. When the torque gets to be too strong for the tip then the screwdriver tip winds itself out of the screw thus preventing over-tightening and or damage to the screw head. Coarse thread screws (mainly drywall screws) have an extremely sharp point and are designed to penetrate plasterboard skin. The coarse thread eases in to the board then the timber baton holding the board firm.Drywall Screw Phillips Bugle Head SCT Black Phosphate 3.5 x 50mm Bulk 1000
The Faithfull Parallel slotted tip screwdrivers with high quality, correctly hardened and tempered Chrome Vanadium steel blades. With full size bi-material soft-grip handles for maximising user comfort and firm non-slip gripping. Each handle is colour coded with a drive icon displayed on the end for easy identification.The FAISDP200 Slotted Parallel Soft Grip Screwdriver has the following specifications: Type: Parallel. Tip: 5.5mm. Length: 200mm (8 inch).
