To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric. Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor. The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part. Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER: Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. Removeable Nose Protector Ventilation The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation. Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.
Specifications:Size: 12 x 12 cmType: Grace, Ambition, Vision, Team, WisdomMaterial: PVCInstallation:Clean the window or surface.Carefully peel off the backing layer from the decal.Place your decal on the window. Use a credit card to smooth the decal onto the window.Package Included:1 x Car Sticker
Description:Flexible RGB LED Flashing Light Strip Kit, Brightly light up your Motorcycle in MultiColor.4 Button Metal Key Fob Wireless Remote Controller.Very Slim, Easily Hidden Control Box.These slim 10mm strips bend and Conform around corners on the body panelsand chassis anywhere desired on the Motorcycle.Power the Light Strips on and off using the included wireless remote unit from up to 100 feet away.The waterproof wires are put in to the PVC tubes sealed with pouring glue.Feature:Stylish designed, Brightly Color4 Button Wireless RemoteWaterproofSpecification:RGB ColorMaterial: Waterproof PVC tubesStrips wide: 1cm/0.4Strip Length: 10cm 4 / 20cm 8 / 30cm 12 / 40cm 16 / 50cm 20Total LED Qty: 540 LEDsVoltage: 12v DCOutput Power: 150WBattery Type: 27A 12V battery (package NOT included battery.)RF Remote Control: About 1-10 metersFitment: Universal for Car / Bikes / Motorcycles / Motorbikes / Truck / Lorry / Boat etc.4 Button Function:A: Short Press 1-15 Times, 15 Kind Of Static Color ,16-17th Times, 15 Color JumpingMillion Color fading,Long Pressing to make the Static Color Dimming. Under the JumpingFading,Long Pressing BC Button to change the SpeedB: Short Press to Make the Select Color FlashingC: Short Press To Make The Select Color FadingD: On/Off, Long Pressing To ResetPackage Included:4 X 4 LED Strips4 X 8 LED Strips4 X 12 LED Strips4 X 16 LED Strips2 X 20 LED Strips1 X Remote Control (without battery)2 X Blade Terminal1 X 12 Way Splitters
Our first non-impact protective glove and your second skin. The all-new MicronGrip palm is setting a new standard for gloves in this price range and is guaranteed to impress. The upper handâs stretch material is both lightweight and offers good airflow whereas the pre-curved, seamless palm makes this a truly good glove. Itâs easy to forget that you are wearing these âbarely-thereâ gloves. Features MicronGrip Palm Super slim with superior handlebar feel Excellent dry and wet grip Very durable with touch screen function Silicone grip print Pre-curved, snug fit and seamless palm Vented, Lite upper-hand material Multi-ply, nylon thread stitching
The Alpinestars Câ10 glove incorporates a hydrophobic textile outer and DRYSTAR® liner to keeps your hands dry while riding in the rain. Preâcurved fingers and a knitted cuff ensure the glove is as comfortable as it is protective. Features Hydrophobic textile upper construction is lightweight and durable. Single layer, soft Goatskin palm construction provides abrasion resistance where it is needed the most. DRYSTAR® membrane insert is both waterproof and breathable, keeping the hands dry and comfortable. Overâmolded hard PU knuckle affords excellent impact protection. Additional protection provided by 4mm EVA foam padding on top of the hand and fingers. Preâcurved finger construction reduces fatigue while riding. Accordion stretch inserts on fingers improves fit and comfort. Thinsulate® thermal insulation keeps hands warm.
Feature:1. Echo cancellation and noise suppression (CVC) technology during call.2. bluetoothanswer, hang up, reject, redial, private answerand other functions.3. Support bluetooth stereo music playback.4. Support mobile phone navigation, support A2DP.5.Support to pair two mobile phonesat the same time.6. Support MP3/WMA music format.7. Automatic power off memory function.8. Support bluetooth power off automatically back.9. Support calling broadcast function.10. Support Chinese / English.11.Built-in solar panel for convenient using.Specification:Material: ABSColor: BlackCable Length: 50cmWorking voltage: 3.3V-4.2VPower consumption: 1WWorking temperature: -20-50 degreesFrequency response: 20HZ-15KHZbluetooth sound processing: A2DPbluetooth transmission distance: 10 metersCharging voltage: 5V/500mAWorking temperature: -20-50 degreesbluetooth version: V3.0+EDRCharging time: about 3 hoursCall time: about 8 hoursStandby time: 50 hours / 2 daysPackage Included:1 X Solar bluetooth Handsfree1 X Cable1 X User Manual1 X Holder Accessary
