Stanley Roller Cabinets are designed for use in conjunction with the module system, with 3 modules fitting each drawer. They feature a central locking system for security. The drawers of the cabinets have 35mm ball bearing slides for full drawer extension, non-slip mats for the drawers are included. The cabinets have swivelling and locking wheels for manoeuvrability and security. Load capacity: 300kg. Number of drawers: 4.
The ALM Manufacturing Replacement Chainsaw Chains to fit a wide range of chainsaw makes and models.The ALMCH066 Chainsaw Chain has a 3/8 inch Low profile (L/P), 0.043in guidebar slot 0.325 mm and Low profile (L/P) 1.1 mm guidebar slot.This chain is made to fit the Ryobi range and suit saws with a 40cm bar and chain with 66 drive links including:PCN-3840, PCN-4040.
The ABUS 92 Monoblock shutter padlocks have a solid brass body encased in hardened steel jacket and a through hardened steel alloy shackle which rotates when attacked. 5 Pin precision cylinder with anti-pick mushroom pins and rustfree components. A hardened steel pin protects the narrow side of the lock against sawing and the deadlock mechanism requires a key to lock. NANO PROTECT™ Chrome Plating, Hardened steel and through hardened steel alloy shackles get the most effective protection available, where smallest nano particles close the smallest gaps found in the normal chrome plating 'making rusty shackles a thing of the past' 1,000 hours salt bath test, the equivalent of 40 years in a harsh environment proves the durability of the NANO PROTECT™ process.Overall width: 67 mmOverall height: 58 mmOverall depth: 28 mm Shackle width: 33 mm I.D.Shckle height: 14 mmShackle Dia: 10 mm
These Facom 12-point OGV sockets have a 3/8 inch drive to fit 3/8 inch ratchets. They are high quality and ideal for tightening and loosening bolts, nuts and other fasteners.The sockets are available in a range metric sizes.Performance: conforms to ISO 2725-1, DIN 3124 and NF ISO 2725-1.The FCMJ17 socket has the following specifications:Socket size: 17mm.Length: 30mm.Weight: 52g.
These Forgefix Phillips, single thread Drywall Screws have a black phosphate finish for increased durability. The screws come complete with a Phillips No.2 insert bit. Their Bugle Head allows the screw to sink effortlessly into the dry lining without the need for countersinking, which in turn minimises the damage to the surface. APPLICATION:Designed for fitting dry linings to studding. Phosphate coatings are made up of thin crystalline layers of phosphate compounds that adhere to the surface of the fixing or fastener. The phosphate crystals are porous and can be formed from zinc, manganese, or iron phosphate solutions. Phosphate coatings offer good corrosion resistance and have an excellent ability to absorb supplementary coatings which improves appearance, corrosion resistance and resistance to abrasion. The Phillips screw has four simple tapered slots. It is designed so that a Phillips tip screwdriver can turn a Phillips screw with increasing torque. When the torque gets to be too strong for the tip then the screwdriver tip winds itself out of the screw thus preventing over-tightening and or damage to the screw head. Coarse thread screws (mainly drywall screws) have an extremely sharp point and are designed to penetrate plasterboard skin. The coarse thread eases in to the board then the timber baton holding the board firm.Drywall Screw Phillips Bugle Head SCT Black Phosphate 3.5 x 50mm Bulk 1000
