18W Tipo / F Flood 6000K 6-Epistar del trabajo del LED Light Bar DIY utilizar en el coche / barco / faro Auto

Description:The brand for Ford Cars, in the replacement tire pressure sensor or tire pressure alarm or exchange tires, need to carry out tire pressure reset operation.Operation Method:(1)Set the vehicle into the tire pressure training mode (plug the key, step on the parking brake, the car keys from the off to open 3 times, and then step on the parking brake, turn off the car keys, and then from the off to open three times; Training mode for the vehicle to start the state of the three consecutive dangerous alarm flash), if you hear the speaker sounded that the training mode has been enabled;(2)Starting from the left front tire, the antenna of the dedicated tool for tire pressure monitoring is facing upwards against the tire sidewall near the rim of the valve stem to start the antenna. Press and release the start button and wait for the speaker to emit a chirp. Once the speaker is chirping, the sensor information is read and the turn signal to be read at the next position will light;(3)When the speaker is ringing and the right front turn signal light is on, the remaining three sensors repeat step (2) in the following order: 3.1. Right before 3.2. Right rear 3.3.Left rear;(4)When the left rear sensor has been read and the speaker is also issued twice, the read process is completed and the body control module also exits the read mode.Precautions:1: The new battery power lead to less than the standard launch power, after use, please charge about 2 hours;2: Is the position of the a

Tipo:Xenon HID; Potencia (W):35W; Color temperatura:8000K; Voltaje de Entrada de Balastro (V):9-16; Voltaje de Salida de Balastro (V):12; Potencia de Salida de Balastro (W):35W; Soporte de Lámpara:H7; Color de la Luz:Blanco cálido; Dimensiones de Unidad / L x A x L (cm):97.71.5; Peso Neto (kg):0.214; Función:Linterna de Cabeza; Material:Plástico; Características:Regulable

Alarma sonora:Sí; Núm de sensores delanteros:2; Núm de sensores traseros:2; Activa hacia atrás:Sí; Distancia de detección (m):0-2.5m; Ángulo de detección:120; Volumen de alarma:≥ 120dB; Potencia (W):3; Resolución de cámara (Píxeles):30万; Voltaje (V):DC12V; Temperatura de operación (°C):-1545

Description:1.New ironing method, 90or 180double angle ironing.2.304 stainless steel energy-gathering nozzle, smooth and does not hurt clothing.3.1800W, heating pan. Simulation of sports car turbocharging, steam pressure 25S.The newly designed cavity is closed to accelerate the internal thermal cycle.4.High-temperature cotton, elastic sea brocade. Increase the widening design,tightly fit the elastic sponge with the high-temperature cotton cloth, iron the clothes,and set three-dimensional staggered air holes inside, double the breathability.Specification:Product name:Garment SteamerOperation mode: mechanicalPower mode: ACRated voltage: 220VBracket: YesAdvantage:Support hanging or flat ironingLarge capacity water tankThick and stable double rod bracketHumanized detail design11 levels of intelligent adjustment1800W high powerPackage Included:1 XGarment Steamer

Capteur d'image:CMOS PC1030 1/4"; Fonction Vision nocturne:Oui; Waterproof:Oui; Grand angle:120°; Système vidéo:NTSC; Nb de pixels total:656 x 492; Résolution:420 Lignes TV; Luminosité minimale:1.5 LUX; Alimentation:12V DC; Température de fonctionnement:-20℃~70℃; Marques de voitures Compatibles:Compatible avec tous les Automobiles

The Integral LED USB Table Light is a economic and compact LED light that
is ideal for bedroom furniture such as bedside units, night stands and
sideboards .
The light is powered via a USB socket, which allows it to be charged by
a mains adaptor or by drawing power directly from a smart device. The
Table Light includes a built-in USB output to charge devices such as smart
phones and tablets.

Functions
The light is controlled by an intuitive capacitive touch interface
and memorises the previous light setting to suit user preferences.
A 60-minute timer is included, making the Table Light ideal for children
who struggle to sleep in complete darkness, as the light will
automatically turn itself off after an hour.

Versatile Design
The body of the Table Light is white in colour, stylish and compact.
The base of the product uses anti-slip material to keep it stable during
use.




Key Features
- Easily controlled by an intuitive, capacitive touch interface
- Memorises the previous light setting to suit user preference
- Versatile LED light that is ideal for bedside units
- Powered via a USB socket that allows multiple charging adaptors via
main or by drawing power directly from a smart device/ PC or laptop
- The LED lamp is equipted with an USB output to charge your smart
devices
- The 1 hour timer function is ideal for those who struggle to sleep in
complete darkness, the light automatically turns itself off after an hour
- Anti-slip material on the base to keep the LED lamp stable on any
surface




Specification
Base Colour: Matt Pink
Optic: Clear Refractor
Length: 69mm
Width: 120mm
Weight: 90g
Power: 2.0 Watts
Lumens: 145lm
Colour Temperature: 2700k
Lifetime: 30,000 hrs Warranty: 3 Years