Car Seat Hook Vehicle Head Rest Hanging Hanger Bags Clothes Holder

The Racecraft represents our commitment to create an enhanced user experience, by providing racers with a higher level of functionality and accurate vision. The synthesis of precision engineering and minimalistic design results in a premium goggle that performs as great as it looks. Features
Outriggers: Helping to achieve perfect fit and balance. Removable nose guard: The attachment of the nose guard ensures stability and protection in the most testing conditions. Lens: Anti-fog coated Lexan lens for flawless vision. Shares the same lens shape across the product line. Lens attachment: 9 pin lens retention system. The highest number of retention points in the industry ensures a secure fit. Strap: 45mm wide, Silicon coated strap eliminates slippage. Air intakes: Patent pending technology channels air into the foam, aiding in moisture management. In the box: stack of standard tear-off s and a sublimated microfiber bag.

Nostalgischer MotorradstiefelRahmengenäht Rutschfeste Profilsohle Wasserabweis. Rindleder Abriebfeste Schaltverstärkung Echt Leder Sehr hochwertiger Klassik-Stiefel Kalbs-Lederfutter Reißverschluss hinten Rutschfeste Gummiprofilsohle, durchgenäht; öl-, säure- und benzinfest 30 cm hoch Größe 40 - 47

Features
waterproof, windproof and breatheable ergonomically adjusted cut additional padding at palm elastic inserts on wrist, back and fingers for more comfort silicone prints on the inside and fingers for better grip Visor wiper hard shell over the knuckles material doubling on inside and small finger velcro fastener on wrist and gauntlet reflective piping soft, durable Tactel fabric in combination with cowhide Porelle climate membran

The SP ConnectTM Moto Bundle lets you mount your smartphone to your motorbike in seconds. Fasten the Moto Mount Pro to the handlebars of your motorcycle and you are ready to mount the SP ConnectTM Phone Case (or Universal Interface) by placing it on the mount and turning it 90° clockwise. To further protect your smartphone the mount also has a unique vibration dampening system that cuts G-forces by up to 40% (depending on bike & phone model). Your mobile phone is securely positioned right in the center of your vision, allowing you to navigate, access your playlists, read messages. Use the Weather Cover to protect your phone from rain and dirt as well as to provide additional shock resistance if necessary. Included
1x Phone Case 1x Weather Cover 1x Moto Mount Pro 3x Plastic spacing inserts 1x StandTool 1x Case Cap 1x Microrail Adhesive
Phone Case
Slim, protective, functional Use of all ports and buttons 3-layer case construction for ultimate safeguarding
Weather Cover
Protects against rain, sweat, dust or mud Adds shock resistance to your phone
Moto Mount Pro
Vibration dampening system CNC machined from aircraft grade aluminum Portrait / Landscape Orientation 360° rotation Fits standard and oversize handlebars ( Ø 2,22 / 2,54 / 2,86 / 3,17 cm or 0,875 / 1,0 / 1,125 / 1,25 inches ) Stainless steel hardware
Note Thick screen protectors or gloves can limit the usability of your touchscreen in combination with the Weather Cover. The Weather Cover can further affect the homebutton functionality of iPhone 8, 8 Plus, 7 & 7 Plus. This can be compensated by enabling the software homebutton (Assistive Touch). The Moto Mount Pro is compatible with following motorcycles > *example picture

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.

Sexy Lace Up String Backless Bikini