R.S.T. gauging trowel with a carbon steel blade and soft-grip handle. Used primarily for mixing and applying small quantities of cement. Size: 180mm (7in).
Stabila Spirit Level 2 Vial, is a smooth-ribbed box section spirit level, the ribbed profile provides extra strength preventing the profile from bending. This spirit level can be used to check the horizontally of overhead surfaces by turning it and its horizontal vial upside down. You can then measure precisely from underneath.1 vertical vial and 1 horizontal vial. Measurement accuracy: in the normal position 0.029° = 0.5 mm/m. For overhead measurements: 0.043° = 0.75 mm/m. Stabila patent. Vials that are moulded in.Stabila 80AN Level 2 Vial.Length: 1000mm (40 in).
The Rawplug Frame Fixings for fixing timber or metal window and door frames to concrete, stone, brick or blockwork. Quick and easy to use, no marking out, drill straight through frame. Anti rotation lugs prevent rotation of fixing during tightening. Tough nylon sleeve prevents frame distortion during tightening.Size. 10 x 160mm.Maximum Fixture Thickness: 110mmQty. 50.Complete with Screws
Record Irwin V150B Woodcraft Vice is lighter in construction than the standard woodworking vices, this useful portable vice can be attached to most working surfaces by means of a 2.1/4in capacity integral clamp. Provision is also made for the body to be screwed permanently to the bench if required. High quality cast body fitted with carefully aligned steel slide bars and main screw. Jaw Width. 150mm (6in).Jaw Opening: 115mm (4 1/2in).
Irwin Snub Nose Bi-Metal Safety Knife Blades The snub nose blade design helps to reduce the risk of accidental puncture wounds. Shatterproof bi-metal blades combine the best of two metals, electro-welded together for superior performance and safety. Bi-metal blades stay sharp up to 3 x longer than carbon steel blades.Irwin Snub Nose Bi-Metal Safety Knife Blades.Qty: 5
These Faithfull professional, high quality Combination Spanners are forged from chrome vanadium steel, which is hardened, tempered and satin chrome plated for corrosion protection. Manufactured to DIN 3113 standards. The broached jaws and rings ensure a consistent tolerance and a guaranteed accurate fit. Both the jaw and ring end are set at a 15 degree offset for ease of use in awkward positions.Size 6mm
The design enables these Tool Clips to be used in a wide variety of applications to either display, hold or store a number of items including tools, brooms, rails etc... CT pattern tool clips, bright zinc plated. Sizes available: from 1/4in to 1.1/2in diameter.Size: 1/2inSupplied in packets of 25 clips
