Hammer fixings are for fast fixing with minimal screwdriver work. Quicker to use than standard plugs. For fixing stud battens to walls before cladding. Although hammered in, they can be un-screwed.Size. 5 x 50mm. Card of 10.Fixture Thickness 25mm.
The Zarges fibreglass compact platform steps with glass reinforced polyester stiles, offering effective insulation and eliminated spark risk. Ideal for use on electrical installation, as well as other special applications. With 80mm deep aluminium alloy treads for comfortable work, and non-slip serrated surface. Includes safety platform (250mm x 250mm). Only 8.8cm wide when folded. Ideal for limited storage applications. All sizes conform to EN 131 standards, and have a 150 Kilo rating.Number of treads: 3. Platform height: 0.68m. Closed length: 1.39m. Weight: 5.9kg. Stile depth steps / back stay: 50 / 50mm. Overall base width: 0.50m. Base spread: 0.71m. Delivered Direct to Business, Site or Home, please note a carriage surcharge may apply dependant on the delivery address, please contact us for further details.
The Stanley medium pile Silver Stripe roller sleeve is ideal for use with emulsion and water-based paints. It has a long life, and provides an excellent all-round performance, coverage and finish. It is made from woven polyacrylic fabric and is suitable for smooth and semi-rough surfaces. Size: 230mm (9in).Pile height: 12mm.Diameter: 44mm (1.3/4in).
Pin vices are chiefly used for holding small taps, reamers, scribers or wire. The handles are tubular which permit holding wires of any length or diameter up through the length of the tool.Size: 1Capacity: 0 - 1mm (0 - 3/64 in)
Tacwise fine wire staple, commonly used for semi-industrial/DIY applications. This staple is thinner than 140 type and not so visible. Suitable for the Tacwise Z1-53, Z1-53l, Z1-53T, Z3-53, Z3-53L and the Hobby 53EL as well as the Arrow JT21, Rapid R53 and other brands taking the popular 53 staple.Size: 6mm.Pack quantity: 2000.
This Forge traditional silent Cabin Hook is suitable for heavy-duty applications. The tight fitting hook and eye prevents movement hence the silent application. Made from solid brass and supplied with all fixings and fitting instructions. Fitting Instructions:1. Place cabin hook in the desired position, and mark fixing holes with a pencil.2. Use the screws provided to secure in place, additional fixings may be required for brick or plasterboard surfaces.3. Place the keep on the hook end and position so that the door is secured as desired and screw into postion.Finish: Brass. Size: 152mm (6 inch).
Paslode IM350+ Diamond point clipped head Nail packs with paper strip, supplied with Paslode Special Impulse gas fuel cells.FINISH: All Paslode nails are Chrome 6, cadmium and lead free and are available in five finishes to meet corrosion requirements.Bright: Economy and bright nails meet the Eurocode 5 requirements for applications in service class 1 (indoor) Specification - No coating.Galv Plus : Meet the Eurocode 5 requirements for applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn / Al alloy approx 15µm.Electro Galv : Meet the Eurocode 5 requirements for all applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn and chromate minimum 7µm.Hot Dipped Galv : Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - Zinc coating minimum 50µm Stainless Steel : Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - A2 according to AISI 304, and A4 according to AISI 316.SHANK: Smooth Shank: The standard nail, offering high shear value and lowest withdrawal resistance. Fixing across the grain. Fixing into end grain. Clenching applications. Specification - Number of centres will vary with shank diameter.Unilock Shank : Increases withdrawal resistance. Drives easier than ring shank fixing across the grain. Specification - The ringed parts have 24 rings per inch.Ring Shank : Provides the highest withdrawal resistance. Fixing across the grain. Specification - RPI (Rings Per Inch) vary from 16 to 32 depending on Specification.HEAD TYPES :Round Head : The head area is designed to maximise resistance to the head being pulled through Specification - Head size between 2.0 and 2.5 times wire diameter according to EC5Clipped Head : Increases number of nails per strip. The head area is designed to maximise resistance to the head being pulled through Specification - Head area corresponding to full round head area, according to EC5
