Masterlock 8.25M Ratchet Tiedown + J Hooks

These Forgefix single threaded Decking Screws have Pozidriv heads and are specially designed, hardened and green treated. The design of the screw helps prevent splitting the boards, and allowing them to expand and contract with the changing seasons. APPLICATIONSpecifically used in Decking applications but also widely used in exterior timber and fencing applications. The 1,000 hour green treated finish offers excellent corrosion resistance to ACQ (Alkaline Copper Quaternary) treated timber used in construction and decking applications. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. Single thread screws have been designed to offer higher pull out values and quicker insertion.Decking Screw Pozi ST Green Anti-Corrosion Treated 4.5 x 75mm Bulk 1000

The Britool 12-point 1/2 inch sockets are crafted in chrome vanadium steel and finished in high chrome. The OGV® profile allows tightening torque to be applied to the sides rather than to the angles of the nut. This product is for manual use only. ASME B 107-1, ISO 1174-1.The Britool BRIE113702B Socket 12 Point Standard 1/2 inch Drive 7/16 inch has the following dimensions:Size: 7/16 AFLength: 38mmWeight: 45g

These Forgefix Phillips, single thread Drywall Screws have a black phosphate finish for increased durability. The screws come complete with a Phillips No.2 insert bit. Their Bugle Head allows the screw to sink effortlessly into the dry lining without the need for countersinking, which in turn minimises the damage to the surface. APPLICATION:Designed for fitting dry linings to studding. Phosphate coatings are made up of thin crystalline layers of phosphate compounds that adhere to the surface of the fixing or fastener. The phosphate crystals are porous and can be formed from zinc, manganese, or iron phosphate solutions. Phosphate coatings offer good corrosion resistance and have an excellent ability to absorb supplementary coatings which improves appearance, corrosion resistance and resistance to abrasion. The Phillips screw has four simple tapered slots. It is designed so that a Phillips tip screwdriver can turn a Phillips screw with increasing torque. When the torque gets to be too strong for the tip then the screwdriver tip winds itself out of the screw thus preventing over-tightening and or damage to the screw head. Coarse thread screws (mainly drywall screws) have an extremely sharp point and are designed to penetrate plasterboard skin. The coarse thread eases in to the board then the timber baton holding the board firm.Drywall Screw Phillips Bugle Head SCT Black Phosphate 3.5 x 50mm Bulk 1000

Blue Spot 01535 1/4 and 3/8 in Drive metric and AF socket set 40 piece consisting of:-12 x 1/4 Hex sockets 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32 and 1/2 AF.13 x 1/4 Hex sockets 4, 4.5, 5, 5.5, 6, 6.5, 7, 8, 9, 10, 11, 12 and 13mm.3 x 1/4 8 Pt sockets 1/4, 5/16 and 3/8 in1 x 1/4 Spinner handle 6 in1 x 1/4 to 3/8 Adaptor3 x 3/8 Hex sockets 7/16, 9/16 and 1/2 AF3 X 3/8 Hex sockets 11, 12 and 13mm 1 x 3/8 Reversible ratchet handle.1 x 3/8 Extension bar 3 in1 x 3/8 Spin disc1 x moulded case

The Faithfulll Carpenter's Pencils lay down a clear visible line irrespective of surface or grain. With the exception of some metals and polished or glazed surfaces, almost any material can be marked out with these carpenter's pencils. The pencil has flat sides to prevent it from rolling away. There are three colour coded grades of hardness to cater for different surfaces. Supplied in a pack of three.Grade: Soft Colour: Blue For softwoods and newly felled timber.

Jetcem is a specially formulated rapid setting cement based patching/repair compound which, when mixed with water, sets in about 30 minutes. Rapid setting (30 minutes, depending on ambient temperature and conditions).Easy mixing, just add water.Fills up to 25 mm in one application (for deeper holes in excess of 25 mm use Jetcem Premix sand/cement) Benefits: Internal and external repairs to gaps and cracks and walls and floors.Repairing flags, slabs, stones and bricks.Patching steps and window sills.Pointing brick and stone.Jointing earthenware pipes and drains.Repairs to ponds and pools.Setting in W/Cs and sinks.Leak sealing in concrete based surfaces.Setting railings and posts.This pack comprises 4x 3kg Jetcem Rapid Set Cement.