Bandit Classic Motorradbrille Gelb Einheitsgröße

2in1 touring jacket - developped for strong women Features
600 D Polyester 500 D Polyamide big stretch panel at sides reflectors AirVent ventilation zips lots of adjustments detachable Hitex® membrane: 100 % waterpoof, 100 % windproof shoulder and elbow protectors certified according to EN 1621-1 upgradable with back protector SAS-TEC SCL-XL 19 2 outer pockets, 2 inner pockets connection zip

Büse Manhattan, leather jacket

* securized stitching * thick and supple cow hide * high abrasion resistance synthetic fabric reinforcements on exposed areas (forearms and knees) | Article: Ixon Vendetta Evo One Piece Motorcycle Leather Suit, black-yellow, Size 3XL | Article: Ixon Vendetta Evo One Piece Motorcycle Leather Suit, black-yellow, Size 3XL, black-yellow, Size 3XL

The Fonus Car Cup Mount provides a simple way to keep your Smartphone securely in place for a car trip. Using your cars cup holder, the cradle safely holds your compatible Smartphone within easy viewing distance. The mount rotates 360 degrees for viewing your device in portrait or landscape mode and flexible goose neck to position your smartphone. The Car Cup Mount features an expandable base that fits any car cup holder.Specification:Material:ABSColor:BlackShrink size:7cm x 12cmExpand size:11cm x 14cmFeatures:-Fits the devices with or without a protection case.-Made by high quality and durable materials to last.-Suitable for the mo bile phone those width is 55mm-90mm-Base expands to fit any vehicle cup holder; no suction or adhesive required.-Flexible goose neck and 360-degree rotatable holder for the best viewing angle.-Adjustable grip fits i Phone, smartphones and mo bile phones. Arm grip easy release button.-Mount holds touch using your cars cup holder; lets you safely use your phone in the car.Package included:1 x HolderNote:1.Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.2.Please allow little differs due to manual measurement.

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.

Features:-Super high brightness.-Great quality and great Fitment.-Easy Install, No Installation Instruction.-Low Power Consumption, Save Your Power Supply.-The suitable design for heating elimination.-The valid lighting distance is much more longer than normal bulb.-Applying to difference light resource(Such HIGH LED Lamp).-The high performance of tight waterproof, dustproof, shock-proof, anti explosion.-Professional Installation Recommended.Specification:-Type: Fog Light-Bulb Type: LED-Lens Color: Clear-Size: 18*10*11cm/7.09*3.94*4.33in-Weight: 865g-Placement on Vehicle: Front, Right/ Left-Manufacturer Part Number: A1649060451Fitment:forCOROLLA AE100 AE101 1993-1997Notice:- Please allow 1-3CM differs due to manual measurement.- Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.Package Included:2 x Fog Light (Left+Right)Fitment:forCOROLLA AE100 AE101 1993-1997