PMJ Legend, jeans

Specification:Color: BlackLight Color: Xenon White(6000k - 7000k)Size:As the below picture shownBistance between bolts:113.1mm/4.45Material: plasticsRated Voltage: DC 12VWattage:5WLifetime:5,0000-10,0000hrsLuminance:1,0000-1,2000MCDPower line length:150cmNumber of LED Per Piece: 6Number of Pieces: 2Feature:1.100% Brand new and high quality.2.It is durable and Waterproof.3.L Shaped Design and long LED service life.4.Does Not increase fuel consumption and uses 35% lower power, which results in Increased Battery Life.5.Automatically switched On/Off.(On/Off Switch is not included)6.These LED daytime running lights can not only be used as a decoration, but also the main function is to improve driving safety.Fitment:Fit all 12V vehicles such as Cars, Trucks, SUVs, and etc.Note:1.Please ensure what you received is as expected and check compatibility with measurement before purchase.2.Please allow 0.5-1 inch difference due to manual measurement.(1 inch=2.54cm)3.The color of the actual items may slightly different from the listing images due to different computer screen, thanks for your understanding.4. Manual is Not included in the package.5.On/Off Switch is not included.Package includes:2 x Daytime running lights

Carbon Fiber Gear Shift Knob Head Cover For BMW 3 Series E90 E91 E92 E93Specifications:Material: ABS PlasticColor: Carbon Fiber PatternSize:4.8x9 cmFeatures:- Carbon Fiber Style and OEM Fit- Environmentally friendly Material, Not Change Color, Not Fade, Wear Resistance, Easy to Install and Clean.- High Quality Adhesive, not leave traces after tearing off, not damage the original car.Fitment:For BMW 3 Series E90 2005-2011For BMW 3 Series E91 2005-2012For BMW 3 Series E92 2006-2013For BMW 3 Series E93 2007-2013Package Included:1x Gear Shift Knob CoverInstallation Methods:1. Clean the location of the installation with rubbing alcohol before proceeding. (Make sure to remove any grease, wax or dust etc.)2. Please ensure that the product completely fits before proceeding with installation. (Note: If there any questions or if the product does not fit properly, please contact us.)3. Remove the high strength double-sided adhesive from the back of the plate. In the case of a relatively low temperature,heat installation location, and plate with a hair dryer or a heater on low setting.4. Carefully place the product in desired location and press down for about 1-2 minutes,(Note: Do not wash your car for 24-hour. The adhesive should be cured after 12-hour.)5. The installation is completed.Note:1. We provide clear pictures, measurements where possible. Please check as much as possible to make sure the item is the one that you need.2. Please allow 0.5-1 inch difference due to manual mea

Descrition:Horn switch control line: yellow + green line.Headlight switch control line: red line + black line.Universal switch for 7/8 diameter handlebars.Get your dirt bike street legal with the motorcycle control switch.Made of high quality material, waterproof and can resist extremely weather conditions.This Switch is Small in size does not take up much room on your bars,It can be easily mounted over your existing clutch lever perch to save space.Specification:Color: BlackMaterial: PVC, ABS, Heavy duty aluminum shellVoltage: 12V DCCable Length: 48cmFitment:7/8 inch diameter barsFor reference: For Honda/Suzuki/Yamaha/Kawasaki/Harley/KTM/Ducati/Aprilia/Vespa/Kymco/Piaagio/Agusta/KTM/BMWMotorcycles / Scooters / Dirt Bikes / Quad / ATVs / Banshee / PolarisFit all with 7/8 handlebarsNote:1. Please check the specifications above to make sure itfits your bike and is suitable for your motorcycle, dirt bike or ATV or pit bike.2. Manual measuring, please allow 1 ~ 5 mm error,thank you.3. Due to the difference between different monitors,the picture may not reflect the actual color of the item.We guarantee the style is the same as shown in the picture.Package Included:1 X Motorcycle Handlebar Headlight Head Switch

LS2 FF327 Challenger
UV-resistant layer security certification 3 bowls made of HPFV
Shell sizes
LS2 offers multiple case sizes, custom-sized EPS protective films and our high-performance, high-quality comfort filler as well as 3D laser-cut plastic foam for a perfect fit and comfort throughout the day.
It is made from HPFC
The high performance fiberglass composite material consists of carefully layered layers of a unique resin preimpregnated fiberglass fabric to form a tough, ultra-light and inflexible casing or shell that disperses impacts in a safer manner.
Cooling system
LS2 helmets have a so-called "Dynamic Flow-through Ventilation". Multiple adjustable inlet ducts and EPS damping with air ducts in conjunction with the rear spoiler and exhaust ducts provide permanent ventilation to provide the driver with cool and comfortable conditions.
Metallic security badge
This small metallic triangle is an exclusive LS2 feature, which additionally strengthens the connection of the helmet band with the helmet.
Quick release
The metal buckle combines with a high-quality chin strap with a plastic tongue with teeth. When closing you hear a soft "click". As far as locking until you reach a comfortable but tight seat. Pull the ribbon to unlock the tongue. Further adjustment options are provided by the chinstrap on the side of the metal buckle.
Emergency release system
Our emergency release system allows the emergency service to remove the helmet pads and thus create an additional space for helmet removal with minimal movement of the injured person s head and neck. It is recommended that someone holds the helmet to avoid movement when removing the padding. Slide your finger into the red ribbon and gently pull on it to remove the pads. Slide the side pads over the straps and remove them from the helmet.
Visor
LS2 visors are made from 3D optically correct "A-class" polymers, a space exploration polymer with high resistance to impact energy and maximum visibility. Our visors are stable, scratch-resistant and UV-resistant. All this combined with the ultimate PINLOCK technology provides the most advanced anti-fog standard.
Quick disassembly system
This system (patent pending) simplifies the change of the visor with the bare hands. The spring detent built-in with detent pin secures a perfect fit without air gaps when the visor is closed.
Comfort lining
All LS2 helmets have removable and washable inner lining to keep them fresh and new. Our anatomically designed cheek pads are based on LS2 s 3D laser technology for a perfect fit. We use hypoallergenic substances, which carry away the moisture, in order to ensure the driver always pleasant conditions.
Chinguard
A high-quality fabric placed in front of the chin reduces the airflow in the driver s face and makes it easier to drive. The chin guard is removable when hot.
Hypoallergenic
We use hypoallergenic substances that support the moisture transport and ensure a comfortable fit.
Laser cut upholstery
Foam with different densities is laser cut in 3D and adapts perfectly to the driver s head shape.

Precision at speed: the Hypersport2 jacket is the upper echelon of the ICON line. A stylish blend of 1.1-1.3mm TrackSpecTM leather and textile chassis, coupled with ICON’s Attack Fit, creates a jacket built for velocity. Full D3O® impact protector package (elbow, shoulder, back), and the accordion leather flex zones allow for a jacket that contours to your body straight off the rack. The deep chest pockets that double as chest vents, retro-reflective hits, and padded microfleece comfort liner collar are just a few of the rider-centric details you’ll find. For the throttle jockey, we’ve added an internal waist zipper that connects to the Hypersport2 pant, perfect for when you want to go to the track and wind it out. Material
1.1-1.3mm TrackSpec™ leather chassis.
Protectors
D3O® impact protectors - Shoulders, elbows, back.
Features
Integrated Flex Zones Dual-purpose Chest Vent/Pocket Reflective Screenprints Microfleece Comfort Liner Collar Waist Zipper for attaching Hypersport 2 Pant (sold separately)
Fit Icons attack fit jacket is designed with pre-curved arms to be tighter to the body and form fitting, making it aerodynamic and comfortable at speed. Its figure-hugging cut means this style could be worn over a T-shirt or other slim layer. Conditions Superior materials and a removable insulated liner minimizes bulk while retaining range of motion and adaptability to the weather, keeping you comfortable on mild to colder riding days. Material Leather is used for its abrasion resistance because it breathes and has the ability to absorb humidity. Also, it can keep you warm in colder weather and cool when it’s hot. TracSpec™ Leather Sourced from the toughest hides available, our TracSpec™ leather is the same grade as used in high-end road race suits. TracSpec™ is a top-grain leather utilizing a pigmented outer surface for great wear characteristics, conforming to your body over time. A high-quality top-grain leather provides you with both durability and reliability necessary for motorcycle use. Focused Tailoring Icon understands the core needs of the modern street rider. We pre-curve the arms and made it tighter to the body to be more form fitting and aerodynamic at speed. D3O® Impact Protector Package Includes a full suite of industry-leading D3O® Impact Protectors (shoulders, elbows, and back). D3O® unique technologies provide both enhanced protection and a versatile, flexible material for a host of shock absorption and impact protection. Delivering the most flexible and discreet protection on the market, D3O® consistently outperforms traditional foam-based materials.

* securized stitching * thick and supple cow hide * high abrasion resistance synthetic fabric reinforcements on exposed areas (forearms and knees) | Article: Ixon Vendetta Evo One Piece Motorcycle Leather Suit, black-yellow, Size 3XL | Article: Ixon Vendetta Evo One Piece Motorcycle Leather Suit, black-yellow, Size 3XL, black-yellow, Size 3XL