Gratis
Apoyo
Catégorie:Toile roulée; Artisanat:Peinture à l'huile Hang-peint; Sujets:Personnage; Quantité:Un Panneau; Forme:Verticale; Style:Moderne; Matière:Toile; Espaces appropriées:Bureau de maison,Entrée Portique,chambre d'enfants,Salle à manger,Chambre à coucher,Salle de séjour; Poids à l'expédition:0.45; Date de l'annonce:01/30/2023; Taille:6090/70100/90120/100150/120180
The Aqua Stop connector has an internal valve that stops the water flow when an accessory (eg a spraygun) is disconnected. This saves having to go back to the tap to turn the water off when switching between accessories. It also helps save water in the garden by stopping the water flow, thus preventing water being wasted.All internal parts are made from ultra tough engineering plastics for a long leak free life and the connection to the tap is guaranteed secure up to 10 bar, thanks to a triple locking system. The sleeve is easy to use even when wet due to the twin soft touch pads and the hose remains securely connected via the barbs that connect with the inside and outside of the hose. Hose kinking, swelling, and leaking at the connection point with the fitting is virtually eliminated due to the ingenius flexible hose-tail on the nut. Suitable for use with all 12.5mm (1/2 inch) and 15mm (5/8 inch) hose diameters.
Few things are more dispiriting than turning the ignition key and hearing nothing. Just when you need your car to start, it plays dead. Worse still, it's probably your fault. Look at the lights switch - did you leave them on? Modern car batteries are very reliable, but leaving the lights on for a few hours will soon discharge them. Even a boot light or an interior light left on overnight can flatten a battery. And a car left standing for a month or so may discharge its battery just from the current drawn by the alarm.To start a car with a flat battery you need the S Style SSJL200, a set of good quality heavy-duty cables with beefy clamps at each end, and a friend is also a good help! Your friend must have a car with a battery in good condition, this will aid in the success on starting your flat battery. Simply position another car near yours so that the batteries are close, but do not let the vehicles touch. Connect one end of the SSJL200 red jump lead to the positive (+) terminal of the boosting battery (Do not let the other end of the red lead touch any vehicle metal components) and connect the other end of the red lead to the positive (+) terminal of the flat battery. Then connect one end of the SSJL200 black jump lead to the negative (-) terminal of the boosting battery and connect the other end of the black lead to a bolt or metal bracket, well away from the battery, on the engine block of the vehicle to be started is a good source. Ensure that the S Style SSJL200 jump leads cannot come into contact with any moving parts of either engine. Start the engine of the boosting vehicle and run it at a fast idle speed for a few minuets. Now turn the ignition to start the engine of your vehicle, the S Style SSJL200 will pull power from the boosting battery to help your battery back to life. Check that your vehicle is running properly then carefully disconnect the SSJL200 and your on your way. 200 Amp.2.5m length.Jump lead with 10mm insulation.Supplied in poly bag with euro slot.
Girls Women Urine Funnel Wee Urinal Female Camping Travelling Festival Standing Pee
Retro Zinc Alloy Mount Hooks Towel Clothes Hat Coat Hanger for Door Wall,perfect for using in bathrooms, bedrooms, and closets.
This Forge classic Backplate Handle has a scroll lever design. The sprung handle has a lasting finish and is lacquered to prevent discolouration during use. Ideal for internal or external use these handles have been tested for corrosion resistance and cycle tested beyond 120,000 uses. Screws Included. Fitting Instructions:1. Place the spindle bar through an existing tubular latch or lock and position one handle over the spindle bar. Ensuring the handle is square, mark the screw hole positions with a bradawl.2. Drill Ø2mm pilot holes and reposition the handle before securing using the wood screws provided.3. If fitting Bathroom handles, now insert the bathroom spindle bar through the deadbolt hole of the lock from the outside of the door and place the thumbturn onto the spindle bar. Tighten the grubscrew on the underside with the hex key provided.Designed to be used with a mortice bathroom lock with centres of 57mm. The thumbturn includes emergency access from the shut side with a coin or screwdriver. Backplate Size: 102 x 40mm.Finish: Chrome.