Unique, patented OMEGA bend. The innovative OMEGA screw clamp is produced entirely from BESSEY precision steel. A lightweight screw clamp that is both extremely easy-to-handle, and exceptionally robust. But the real innovation is its unique, patented OMEGA bend. This allows increased deflection of the fixed jaw, adding lateral tension to the screw resulting in considerable reduction in the resonant frequency. That means that, even when vibrations are present, this clamp will maintain its clamping pressure longer than a conventional screw. High-quality 2-component plastic handle.Pressure plates may be changed without tools.Universally applicable within the fields of wood and metal processing. Your benefits at a glance:1 Innovative OMEGA bend.The patented OMEGA bend gives you added safety. It means you lose even less clamping pressure, even when vibrations are present. 2 Versatility.Fixed arm and pressure plate are produced and tempered from a single piece of high quality BESSEY steel. Clamping is resilient and elastic. 3 Close flat clamping.The OMEGA bend applies the rail absolutely flat to the surface of the work piece. This allows clamping right into the corners. 4 BESSEY Best-Comfort-System.With BESSEY Best-Comfort-System, all applications and tasks are well within your grasp. Pressure plates can be changed quickly without the need for tools, to make BESSEY comfort still more inviting.The Bessey GM40Z2K has the following:Clamping force up to 5,000NOpening 400mmThroat depth 120mmRail 25 x 12mmWeight 1.95Kg
The DMT D9 Diamond sharpening bench whetstone has non-slip feet and will not break, chip, crack, hollow or groove. The D6 whetstone is made from the hardest material which is one of the most efficient sharpening abrasive. Available in unique interrupted surface and continuous surface, light pressure produces a sharp edge with just a few strokes. Use water for lubrication no oil, smell or mess and can hone ALL hard materials: carbide, steel, etc. and is supplied with Non-skid mat. Precision, continuous monocrystalline diamond bench whetstones with rubber feet. The grit size is etched into the side of the whetstone. The grits are denoted by a dual coloured circle which is set into one end. Blue: Coarse Grade 325, 45 micron.Red: Fine Grade 600, 25 micron.Green: Extra Fine Grade 1200, 9 micron.Red: Fine 600g, 25 micron
Designed for fitting to Record vices when holding soft or plated workpieces with highly polished surfaces to provide a firm grip without fear of damage.Special fibre more durable than lead or copper. Supplied in pairs.Size. 100mm (4 in).
Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applcations such a engraving, grooving, rebating and shallow morticing. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature. When deep cuts are required, more than one pass should be taken.Shank: 1/4in.D - Diameter - 15/64in 6.0mmC - Cutting Length - 5/8in 16mmT.C.T. 2 Flutes.
The R.S.T. Pole Sander provides an easy and efficient way of sanding the joints between plasterboards on a ceiling after they have been filled. A swivel head is attached to a wooden pole via a metal thread, and allows easier access into corners. The sander has a soft rubber pad and to keep the the abrasive secured, it has metal clamps. Other poles are available.
