Knipex High Leverage Centre Cutters Cushion Grip 74 91 250

Faithfull universal engineers metal working hammer, precision ground with hardened striking faces to withstand the rigours of all metal working applications. Manufactured in accordance to BS876. Fitted with a traditional hickory handle.Weight: 1360g (3lb)

Theme:Wedding; Type:Dreamcatcher; Material:Feather; Shipping Weight:0.097; Net Weight:0.085; Size:2065-2070

Adaptador de ventana / placa de kit de deslizamiento de ventana para aire acondicionado portátil

The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges. The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved.Length (A): 108mm (4.25 in).Blade length (B): 8mm (0.31 in). Head width (C): 10.5mm (0.41 in). Head depth (G): 15mm (0.59 in). Cutting capacity: 0.35-1.25mm. Head type: Double angled. Cutting edge: Flush. Angled heads, also known as oblique style, are set at an angle to the main body of the cutter. This means that the cutter can reach between parts and areas which are difficult to access. The Flush Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area – more than Micro-bevel cuts. The cutters have fine cutting edges that leave a narrow and short taper and small exposed area. They can be used to meet tight specifications for a flush result to a board, component or part.

Crisol de grafito fundido de alta pureza para herramientas de fundición de metal dorado y plateado de alta temperatura

Faithfull heavy-duty clamps manufactured from a high quality carbon steel bar with large malleable iron clamping heads. Clamp bars have a Black Oxide coating with powder coated heads for complete rust protection. Other features include a high grade steel mainscrew with a wear resistant Acme thread, which applies pressure quickly and smoothly. Tail slides are easily adjusted and secured by a steel pin passing through one of the locating holes. Tail slide and heads are flat bottomed so that the clamp can stand upright without support.