Spidi FIRST E-TYPE

Visier Scorpion for Exo 500 / 1000 | Article: Scorpion Exo 500 / 1000 Visor, blue | Article: Scorpion Exo 500 / 1000 Visor, blue, blue, Size One Size

Spidi Arbeiter Tex ist die perfekte Mischung aus Stil und Motorrad-Geschichte. Zeichnet sich durch eine kurze und schlanke Schnitt, ist mit einer feinen 250 gr Polyester, mischen die Bedürfnisse der Fahrer Sicherheit zu den natürlichen Touch ein hochwertiges Material zugeschnitten.Technische Merkmale:250 g Polyester Mesh-Innenfutter Die Polsterung besteht aus 150gr/qm Hohlfaser Watte Thermal Wasserdichte und atmungsaktive H2Out Membran abnehmbare Step-In Bekleidungssystem Samt gefüttert am Hals EN1621 -1 zertifiziert Forcetech Schutzvorrichtungen an Schultern und Ellbogen Bereit für zurück Krieger Rückenprotektor zertifiziert EN1621-2 Lev 1 und Level 2 Bereit, Brust und Brustkorb Krieger Protektoren zertifiziert prEN1621-3 Dynamische Öffnungen Aufnahme auf der Brust Luft-Extraktoren auf der Rückseite 5 Außentaschen Anpassung Bänder an den Seiten und Ärmeln Produktgewicht: kg. 2,50

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr

Sexy Deep V Printed Criss Cross Backless Bikini

Description:1.Black Matte Finish.2.Installation instructions not included.3.Correct Connector No cutting or splicing.4.Strict quality control standards to Build and test.5.Professional Installation is Highly Recommended.6.Cutting of the hood will be required for installation.7.Help remove unwanted heat from under your hood.8.Universal Hood Louvers Panels can give you a customized appearance on the outside.9.Locate the heat-venting louvers in the most crucial areas of your hood to allow the largest amount of heat to be removed from your engine bay.Feature:Material: ABS PlasticColor: Matte Black FinishInterchange Part Number: Hood-Vent-Louver-Air-FlowOther Part Number: Add-On-Body-KitPlacement on Vehicle: Left, Right, Front, RearDimension: 16.7 x 4.5Fitment:Fits Universal Fit for all vehiclesPackage Included:1 X Pair Of Hood Vents

Specification:Product Name: Motorcycle HeadlightHouse Color: Chrome / BlackLight Source: WhiteBeam: High/Low Beam ConversionMaterial: PlasticLighting Part Type: HeadlightPlacement on Vehicle: FrontWorking Voltage: DC 12VHousing depth: 150mmLens width x height: 75 x 75mmMount: bottom mountQty: 1pcWiring Connection:Black Wire(-): GoundWhite Wire(+): Hi- Beam White LightRed Wire(+): Low- Beam White LightFeatures:Super bright LED front headlightRubber mounts to prevent vibration and fits choppers with bottom mount bracketsChrome ABS Plastic housing and Glass Lens3-wires connectionNo installation instructions includedPackage Included:1x LED Chrome Bullet Headlight