7 Inch Spot LED Work Light Bar Tri Row 3030 72W 6000K for Offroad 4WD SUV

Descrition:Horn switch control line: yellow + green line.Headlight switch control line: red line + black line.Universal switch for 7/8 diameter handlebars.Get your dirt bike street legal with the motorcycle control switch.Made of high quality material, waterproof and can resist extremely weather conditions.This Switch is Small in size does not take up much room on your bars,It can be easily mounted over your existing clutch lever perch to save space.Specification:Color: BlackMaterial: PVC, ABS, Heavy duty aluminum shellVoltage: 12V DCCable Length: 48cmFitment:7/8 inch diameter barsFor reference: For Honda/Suzuki/Yamaha/Kawasaki/Harley/KTM/Ducati/Aprilia/Vespa/Kymco/Piaagio/Agusta/KTM/BMWMotorcycles / Scooters / Dirt Bikes / Quad / ATVs / Banshee / PolarisFit all with 7/8 handlebarsNote:1. Please check the specifications above to make sure itfits your bike and is suitable for your motorcycle, dirt bike or ATV or pit bike.2. Manual measuring, please allow 1 ~ 5 mm error,thank you.3. Due to the difference between different monitors,the picture may not reflect the actual color of the item.We guarantee the style is the same as shown in the picture.Package Included:1 X Motorcycle Handlebar Headlight Head Switch

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr

Description:High Tensile Stainless Steel Overbraid.Apply for Fuel, Lubricant/Oil and Coolant.Made of RubberStainless steel, durable, lightweight and flexible.Specification:Outside: covered with Nylon and stainless steel wiresInner Pipe Material: CPE Synthetic materialWorking Temperature:-40 F to +350 FWorking Pressure:500 PSIBurst pressure: 2000 PSIPipe Connector Size: AN4 AN6 AN8 AN10 AN12Color: BlackFuel Line Length: About 3meterNote:1. Please allow 1-3cm error due to manual measurement. Please make sure you do not mind before you bid.2. The colors may have different as the difference display, please understand.Package Included:1 X Braided Pipe6 X Pipe Connector

Description:1.Fully submersible and perfectly sealed, waterproof spotlight adds a dazzle of color to your pond or fountain2.Comes with LED bulb, 180 degree direction3.Can be mounted vertically or horizontally, adjustable stand lets you point the light at different angles4.Ideal for boat5.Super bright and long-lasting. Easy to installSpecification:Output Power10WInput VoltageDC 12VLifespan50000 HoursMaterialAluminumWaterproof RateIP68Shell ColorBlackPackage Included:2 XIP68 Waterproof Underwater LED light

Features
Waterproof Windproof and breathable thanks to the SympaTex® Professional Klimamembrane laminated to 500 D Cordura® AirFlow ventilation system Removable inner jacket Multiple arm width adjustment Flexi-Snap collar closure Round connection tear Ergonomically adapted cut guide Three outer and two inner pockets
Safety
SaS-Tec protectors on shoulders and elbows Removable foam insert in the back Can be replaced by SaS-Tec Protector (18.0112 to size 52 / 18.0113 from size 54) Reflective elements Safety seams at relevant places
Material
2-layer laminate laminate with 500 D Cordura® and SympaTex® Net lining

Feature:1.No modification required, directly upgrade your original knob.2.Come with 3 hoses (8mm,10mm,12mm).3.Distinctive metal and high quality heavy material.4.Has adapters for different gear sticks diameters ranging from 8mm up to 12mm.5.These sleeves are tightly fitted in place with hidden grub screws.Specification:Product NameShift KnobColorBlue/Red/SliverMaterialAlluminum AlloyPU LeatherGear Knob TypeStandardPlacement on VehicleFrontShift Knob Dimension70mmx15mm/2.76x5.9 inches(L*D)Connector Inner Diameter8mm, 10mm, 12mmInstall:1. Remove the original car gear shift knob.2. Take Plastic adapters suitable size For shift knob.3. Put The gear head into the shift knob.4. The gear head directly set into the shift knob rod.Package Included:1 X Shift Knob1 X Wrench3 X Install Adapters1 Set X Screws