Esquad Sand, jeans

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.

Kurzinfo: Caliber ANT741 - Antenne - Radio - Windschutz, Pkw Gruppe Antennen Hersteller Caliber Hersteller Art. Nr. ANT741 Modell ANT741 EAN/UPC 8714505041773 Produktbeschreibung: Caliber ANT741 - Antenne Gerätetyp Antenne - aktiv Bestimmt für Radio Platzierung / Montage der Antenne Windschutz, Pkw Kompatibilität UHF, VHF, DAB, DAB+ Frequenzbereich 174 - 237 MHz, 470 - 958 MHz Ausführliche Details Allgemein Produkttyp Antenne - aktiv Bestimmt für Radio Platzierung / Montage der Antenne Windschutz, Pkw Farbe Schwarz Antenne Kompatibilität UHF, VHF, DAB, DAB+ Frequenzbereich 174 - 237 MHz, 470 - 958 MHz Verschiedenes Enthaltene Kabel 1 x Antennenkabel - 3 m Stromversorgung Erforderliche Netzspannung DC 12 V

Pro Car USB Ladekupplung 5 Volt mit Schutzkappe 1A - zum direkten Anschluss oder Konfektionieren (65035)

Klim Dakar In The Boot Motocross PantsRuthlessly rugged. Our most popular off-road pant chassis is better than ever with a more streamlined fit, printed fabrics, unmatched durability, cargo capacity, comfort and the best controlled ventilation system ever designed. This all-season off-road pant is just at home conquering Dakar Rally stages as it is roosting your buddies on an all-day local ride.Features:Controlled ventilation off-road pant chassis 840d cordura® integrated into knee and seat Genuine leather on inner knees ads grip/protection New breathable stretch woven panels back waist, above knees, back of legs and in the crotch New printed fabrics on abrasion-resistant high tenacity 600d cordura® Karbonite™ ripstop cordura® nylon on cuffs Adjustable zippered thigh vents allow use in wider range of temps Dwr treatment resists water Silicone waistband to keep pants up and jersey tucked in Side waist adjustments Moisture-wicking breathable liner with stretch zones Vented tpu accents on knees Embroidered logos Low profile pocket Low bulk materials in-the-boot

Kurzinfo: Carcomm CNM-21 - Halterung - für Garmin nüvi 13XX, 20X, 25X, 26X, 27X, 285, 465, 500, 550, 75X, 76X, 77X, 78X, 860, 880 Gruppe Zubehör Hersteller Carcomm Hersteller Art. Nr. CNM-21 Modell Carcomm CNM-21 EAN/UPC 8000420000217 Produktbeschreibung: Carcomm CNM-21 - Halterung Produkttyp Halterung Vorgesehen für Navigator Geeignet für Installation Fahrrad Entwickelt für Garmin nüvi 1350, 1370, 1390, 200, 205, 250, 255, 260, 265, 270, 275, 285, 300, 310, 350, 360, 370, 465, 500, 550, 600, 610, 650, 660, 670, 680, 710, 750, 755, 760, 765, 770, 775, 780, 785, 850, 860, 880, StreetPilot 2720, 2820, c510, c530, c550, c580, i2, i3, i5 Ausführliche Details Allgemein Produkttyp Halterung Vorgesehen für Navigator Geeignet für Installation Fahrrad Informationen zur Kompatibilität Entwickelt für Garmin nüvi 1350T, 1370T, 1390T, 200, 200W, 205, 205W, 250, 250W, 255, 255W, 260, 260W, 265T, 265W, 265WT, 270, 275T, 285WT, 300, 310, 350, 360, 370, 465T, 500, 550, 600, 610, 650, 660, 670, 680, 710,

Kurzinfo: Brodit ProClip Center mount - Befestigungsklammer(n) - Schwarz Gruppe Zubehör Hersteller Brodit Hersteller Art. Nr. 854874 Modell ProClip Center mount EAN/UPC 7320288548746 Produktbeschreibung: Brodit ProClip Center mount - Befestigungsklammer(n) Produkttyp Befestigungsklammer(n) Produktmaterial ABS-Kunststoff Farbe Schwarz Ausführliche Details Allgemein Produkttyp Befestigungsklammer(n) Produktmaterial ABS-Kunststoff Farbe Schwarz Verschiedenes Kompatible Fahrzeuge Opel Mokka / 2013 (für Europa) Buick Encore / 2013 (für USA) Platzierung/Befestigung Armaturenbrett