To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric. Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor. The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part. Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER: Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. Removeable Nose Protector Ventilation The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation. Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.
An excellent and versatile all-weather sport touring pant that is packed with class-leading protection, the Hyper Drystar® Pant incorporates a breathable and 100 per cent waterproof membrane plus a removable thermal lining for superb comfort whatever the weather brings. Features Multi-panel, multi material construction featuring a PU-coated 450 denier poly-fabric main shell and 600 denier dobby reinforcement for optimized levels of durability and abrasion resistance Class-leading impact protection provided by certified knee protectors. Protectors are housed within internal mesh pockets, allowing them to be adjusted according to rider’s leg length Excellent protection against the elements provided by Alpinestars’ Drystar® 100% waterproof and breathable membrane. Membrane feature stretch inserts which mirror the stretch zones of the outer garment for superior freedom of movement Pre-curved legs for comfort with stretch panels on crotch and knee, plus an extensive stretch panel on rear yoke, provides enhanced freedom of movement Removable thermal lining (100g) means pants can be worn in a variety of climatic conditions, adding to their overall versatility Optimized for use with range of textile jackets, thanks to a full circumference waist zipper Ventilation system includes zippered thigh openings which allow for personalized and adjustable levels of airflow Reflective details on lower legs to improve rider visibility in varying light conditions Internal hip compartments are lined with ergonomically tapered PE comfort foam for superior riding comfort. Hip compartments can be upgraded to incorporate Alpinestars new certified Nucleon hip protectors Hook and loop grip waist and leg adjustments for precision fit in various riding positions. Waist incorporates 3D mesh interior for comfort Deep zippered side pockets for peace-of-mind closure and safe storage of valuables
Features Fully adjustable, streamlined visor Reduces aerodynamic drag at high speeds. Ventilation system: the large inlet openings and the rear louvers maximize air flow through the helmet. Large eye opening: offers maximum field of vision and is suitable for all types of glasses. Strap holder: prevents slipping of the spectacle strap. Close the chin strap with a double-D titanium ring 1150g in size M. AIRFIT® New technology of the inflatable Airfit pump, which is located under the chin and has an effect on the cheek pads for a seat-stable stability, the second sits at the rear of the helmet and this time acts on the forehead and temples. KWIKWICK3 ® Very effective, hypoallergenic, removable, washable, very soft and comfortable to the skin, the KwikWick3 ® lining of the new ScorpionExo® models is the best you can do for your head. TCT® Thermodynamical Composite Technology Extremely light - the weight has been reduced by almost 250 grams - the new TCT ® structure offers unprecedented protection in the world of helmets. This intelligent shell is able to yield gradually during a blow or a bump. This absorbs the most energy in an impact, while retaining the extremely strong TCT ® structure. Removable chin bar ventilation Fresh wind in the world of off-road helmets. The ventilation flap is the answer to the real needs of the driver! The chin guard vent can be removed with a small handle for cleaning. Resetting is just as easy. Removal and replacement are done in a few seconds. Helmet screen EXOLON® Deformable and unbreakable, fastened by screws that give way in the event of a violent impact, the Exolon helmet peak is of spectacular effectiveness.
Merlin Elmhurst Motorrad WachsjackeEigenschaften:Eine einzigartige Kombination aus Halley Stevensons® schottisch gewachster Baumwolle und der thermischen Outlast® Innenfutter-Technologie 8oz trocken (12oz nass) Halley Stevensons®, schottisch gewachste Baumwolle Preisgekröntes abnehmbares Outlast® 'Universe' thermoregulierendes Innenfutter Reissa® Active wasserdichte und atmungsaktive Membran Sicherheitsgeprüfte Schulter- und Ellenbogenprotektor mit sicherheitsgeprüftem Rückenprotektor Erweiterung der hinteren Schulterplatten für mehr Flexibilität und Komfort YKK®-Reißverschlüsse mit durchgehendem Antik-Finish Merlin-Druckknöpfe Mehrere Taschen (ein und aus) und Einstellpunkte Kurze YKK®- Jacke zu Hose Verbindungsreißverschluss
* Outer shell: highly abrasion-resistant kangaroo leather palm * DuPont CORDURA® (100% polyamide), leather detailed back | Article: Held Air n Dry Ladies Gloves, black, Size M for Women | Article: Held Air n Dry Ladies Gloves, black, Size M for Women, black, Size M for Women
