The Yale 85 series deadlocking standard nightlatch security locks are some of the most widely-used front door latches. They are key operated from the outside and lever handle operated from the inside. The latch automatically deadlocks on closing the door and the snib function (bolt hold back button) enables the latch to be held back. The inside handle can also be deadlocked by a reverse turn of the key in the cylinder giving additional security (when deadlocked in this manner the latch cannot be opened from the inside only from the outside with the key) Supplied with 1109 Cylinder. The 85 series security nightlatches have a 40mm backset, this is the measurement from the edge of the door to the centre of the keyhole. Locks with a 40mm backset are normally used where there is restricted space, such as on a narrow glass panelled door.This Yale YAL85BLXPL has a hardened Case Finish in Brasslux and the Cylinder is Finished in Polished Brass. The lock is covered by a 2 Year Guarantee and has a High Security Rating.Pack: Boxed
For the control of common black ants in and around the home. Pre-baited station which is clean and simple to use. Kills the ants in their nest without mess or trace. For indoor and outdoor use. Contain Spinosad. Apply at the first signs of ant activity. How to Use: Remove readily available foodstuffs. Remove bait station from pack and twist the base of the unit to open the access holes. Place the bait station on a flat surface as near to the entrance of the ants nest as possible (do not disturb feeding ants as it is essential that feeder ants take the bait back to the nest to the rest of the colony). An effective dose is usually built up within the colony over 7-10 days depending on the size of the ant colony and the frequency of ant feeding. Twin Pack.
This Forge classic Backplate Handle has a scroll lever design. The sprung handle has a lasting finish and is lacquered to prevent discolouration during use. Ideal for internal or external use these handles have been tested for corrosion resistance and cycle tested beyond 120,000 uses. Screws Included. Fitting Instructions:1. Place the spindle bar through an existing tubular latch or lock and position one handle over the spindle bar. Ensuring the handle is square, mark the screw hole positions with a bradawl.2. Drill Ø2mm pilot holes and reposition the handle before securing using the wood screws provided.3. If fitting Bathroom handles, now insert the bathroom spindle bar through the deadbolt hole of the lock from the outside of the door and place the thumbturn onto the spindle bar. Tighten the grubscrew on the underside with the hex key provided.Designed to be used with a mortice bathroom lock with centres of 57mm. The thumbturn includes emergency access from the shut side with a coin or screwdriver. Backplate Size: 102 x 40mm.Finish: Chrome.