Ridgid 734 Tongue Groove Pliers 51mm Capacity 254mm 80475

Faithfull Centre punch with a square head which provides a larger striking area and prevents the punch rolling when laid on the bench. Carefully hardened and tempered and with a 90° ground point.Point Diameter: 1.6mm (1/16 in)Length: 100mm (4 in)

Weller Butane Gas operated soldering iron set is suitable for all kinds of applications. The 3 function soldering iron allows the tool to be used for soldering, hot air and open flame with an operating time of 30 minutes. Features Piezo electronic automatic ignition system and gas capacity display. Supplied in a sturdy storage box.Gas not supplied. Use gas refill PGR1. Comes with: Solder, lead free 1.0mm Dia, 15g, Cleaning Sponge, 3 Soldering Tips: Conical 1.0 mm UND, 2.4mm Chisel Shaped, 2.4mm Plus 'Hot Knife' heat shrinking tip. Specification Max. Temperature Soldering Tip: up to 450°C.Hot Air Nozzle: up to 450°C.Open Flame: up to 1300°C.

3867/1 TS TORX® Bits, stainless Wera Stainless Torsion slotted bits prevent rust on stainless steel fixings caused by contamination from conventional steel tools. Vacuum ice-hardened to the same strength as conventional steel tools, and so suitable for tough, industrial use. Wera Stainless bits feature a unique Torsion zone, extending bit life over standard bits.Use wit Wera stainless Rapidaptor bit holder.Application: For TORX socket screws.1/4in Hexagon Drive, DIN 3126-C 6,3, ISO 1173Tip: TORX, stainless steel.

Faithfull versatile flexible sanding pad, double sided and washable, can be used on wood, paint, metal and plaster, wet or dry and even with chemical paint strippers. Pack of 10.Ultra fineColour - grey

Quantity:1 set; Type:Cleaning Tools; Application:Bathroom; Style:Modern Contemporary,Boutique; Material:Metal,Plastic; Suitable Rooms:Kitchen,Bedroom,Living Room; Item Type:Bathroom Decoration; Features:Easy to Use,New Design; Listing Date:06/30/2022

Paslode IM350+ Diamond point clipped head Nail packs with paper strip, supplied with Paslode Special Impulse gas fuel cells.FINISH: All Paslode nails are Chrome 6, cadmium and lead free and are available in five finishes to meet corrosion requirements.Bright: Economy and bright nails meet the Eurocode 5 requirements for applications in service class 1 (indoor) Specification - No coating.Galv Plus : Meet the Eurocode 5 requirements for applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn / Al alloy approx 15µm.Electro Galv : Meet the Eurocode 5 requirements for all applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn and chromate minimum 7µm.Hot Dipped Galv : Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - Zinc coating minimum 50µm Stainless Steel : Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - A2 according to AISI 304, and A4 according to AISI 316.SHANK: Smooth Shank: The standard nail, offering high shear value and lowest withdrawal resistance. Fixing across the grain. Fixing into end grain. Clenching applications. Specification - Number of centres will vary with shank diameter.Unilock Shank : Increases withdrawal resistance. Drives easier than ring shank fixing across the grain. Specification - The ringed parts have 24 rings per inch.Ring Shank : Provides the highest withdrawal resistance. Fixing across the grain. Specification - RPI (Rings Per Inch) vary from 16 to 32 depending on Specification.HEAD TYPES :Round Head : The head area is designed to maximise resistance to the head being pulled through Specification - Head size between 2.0 and 2.5 times wire diameter according to EC5Clipped Head : Increases number of nails per strip. The head area is designed to maximise resistance to the head being pulled through Specification - Head area corresponding to full round head area, according to EC5