Gratis
Apoyo
MODO X1 2.4G Drohne Ein Schlüssel Return RC Quadcopter
Holybro Kakute F7 HDV AIOOverviewHolybro Kakute F7 HDV All-In-One is designed to work with the DJI FPV VTx module. The GH portavailable on the board makes it much more convenient for you to connect Holybro Kakute F7 HDV AIOto the DJI FPV VTx, for both signal and power supply.Features: Supports Betaflight. High-performance / low-noise IMU. MPU6000 with 6-axis gyro and accelerometer. Ready for autonomous flight: Integrated BMP280 barometer and SCL/SDA for use with externalGPS/magnetometer units. Dedicated bootloader button for easy firmware flashing. Low-profile design fits into even very compact frames. 2 oz. copper PCB allows up to 120A maximum continuous current. Input voltage 7v to 42v. Power the board directly from the flight pack, up to 6S (on B+ padonly). Automatic voltage monitoring. No need to run a separate vBat wire for voltage monitoring; theKAKUTE F7 HDV AIO monitors voltage directly from the power supply. Filtered voltage output for clean, noise-free video. 2 On-board regulators output 5V and 8V. 5Voutput up to 1.5A to power peripherals such as receiver, FPV camera, or LED strip. 8V output upto 2A to DJI FPV VTx. Supports BLHeli pass-through for easy ESC upgrade and configuration.Specifications: MCU: STM32F745 32-bit processor IMU:MPU6000 Barometer: BMP280 USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART) 6 hardware UARTS (UART1,2,3,4,6,7) All UARTS support hardware inversion. SBUS, SmartPort, and other inverted protocols work onany UAR
Radiolink AT10 10 Channel Remote Control System Transmitter With R10D 10CH Receiver Orange Mode 1Description:Brand Name: RadioLinkColor: OrangeItem Name: AT10 Transmitter with ReceiverMode: Right hand throttle(mode 1)Frequency2.4GHzISMband(2400MHzto2485MHz)ModulationModeQPSKChannelBandwidth5.0MHzSpreadSpectrumDSSSAdjacentChannelRejection38dBMTransmitterPower100mW(PCBtesting),20dBm(3meterairtesting)OperatingCurrent105mAOperatingVoltage8.6~15VControlDistancemorethan1000metersgroundChannel10ChannelSimulatorModeUnderthesimulatormodelthetransmitteractionturnoff,changetopowersavingmodelScreen16colorfulscreenSize78x52mm320*480pixelCompatibleModelIncludeall120degreeand90degreeswashplatehelicopter,allfixwingandglider,fiveflyingmodel.Size18x9.5x22cmWeight0.95kgFeatures:Support EnglishChinese MenuMultiple function remote control systemIncluding helicopter,airplane and slider three type flying machine and five models,cover almost every popular model,you can fly any model by this radio.3.5 inch colorful screen 320480 resolution,clear display menu and graphs.Fast response time only 3ms to the operation,faster then the other transmitter 20ms,even ten channels also let you feel it.High channel resolution reaches 4096,0.25us per resolution let all the servos keep tranquil.Strong anti-jumping,DSSS(Direct sequence spread spectrum) technology.Package included:1 x Radiolink AT10 10 Channel transmitter mode 11 x Receiver
This is a very helpful for the development of intellectual toys for children and adults.
15 Tone DIY Hand Cranked Carved Music Box Classic Red Box With Hole Puncher 30 Pcs Paper TapesSpecification:Tone:15Material: WoodType:CarvedSize: 10*7*4.7cmOperate Power: Hand CrankedPackage included:1 X Music Box1 X Puncher30 X Paper Tape(14*blank paper,16*punched paper)Punched Paper:City of the SkyDoggie in the WindowMemoryTwinkle Twinkle Little StarLondon BridgeBragms LullabyOde to JoyMusic Box DancerHappy BirthdayDeck the HallsMerry ChristmasIts a Small WorldDu Lieber AugustinForeverThe Moon Represents My HeartNaughty Blue CatRecommend Parts:(click the title)1.30 Tone DIY Hand Cranked Carved Music Box With Hole Puncher Paper Tapes2.15 Tone DIY Hand Cranked Books Type Music Box With Hole Puncher And Paper Tapes3.15/30 Tone DIY Hand Cranked Hole Punch for Music Box4.10 X 15 Tones DIY Hand Cranked Music Box Blank Paper Tape5.10pcs Paper Tape Strip For 30 Note DIY Music Box Or Movement