Livre 999 + 1 AVENTURES PETITES ET GRANDE

This Teng Tools Industrial wrench is made of chrome vanadium steel for increased strength and durability. It exceeds international standards ISO 6787-1976, ASME B.107.8M-1996, BS6333-1995, DIN 3117-1988 and JIS B4604-1976. Graduated markings on the jaw allow the size of the fastening to be accurately measured and the wrench to be set at the right size. The 15 degree jaw angle allows the wrench to be used in narrow spaces as only 30 degrees turning is needed. The wider jaw opening increases the range of bolt sizes to be worked on. It is non-protruding on the moveable jaw end, which gives better action when space is limited. The handle provides a comfortable hand fit.The TEN4004 Adjustable Wrench has the following specifications: Length: 250mm (10 inch).Capacity: 33mm.Capacity AF: 1.1/4 inch

2 x Übernachtung , 2 x Frühstück vom Büffet, 1 x Gutschein im Wert von ? 30,- pro Person für Speisen in unserem Restaurant am 1. Abend, 1 x 6-Gang-Gourmetmenü mit passender Weinbegleitung, Inklusive einer Minibarfüllung auf Ihrem Zimmer, Wellnesspaket, W-LAN

External corner profiles provide the answer to fast and accurate bricklaying by removing the need to raise corners first. Brick profiles may be used after three courses of bricks have been laid and allowed to set overnight. Once the profiles have been attached to the brickwork and set up, they provide an accurate and firm corner post from which a building line may be run. Building profiles are easy to set up, simple to use and are supplied complete with all the fitments needed to help you lay bricks quickly and accurately. The profiles design also allows easy access to the brickwork for pointing and rubbing in to be completed as work progresses for greater productivity. The galvanised steel construction is simple to set up and remove and can be adjusted using wing nuts. The Faithfull FAIPROEXT profile pack comes complete with all fittings and full instructions including:2 x External steel profiles2 x 225mm (9 inch) retaining bolts2 x 350mm (14 inch) retaining bolts2 x 450mm (18 inch) retaining bolts4 x Clamping brackets2 x Line holders1 x Setting device2 x Stabilisers4 x Wing nuts

Quantité:4PCS; Type:Accessoires pour Cheveux; Matériau:Alliage; Type de cheveux:Normal; Condition d'Utilisation:Autres; Poignée:Autres; Mode de porter:Autres; Caractéristiques:Facile à transporter; Poids Net:0.1; date d'inscription:12/07/2021; Catégories de base:Cheveux Bigoudi Clips et Épingles

The Forgefix Nyloc Hexagonal Nuts incorporates a nylon component to effectively lock the nut into position on the bolt. The nylon component has a smaller inside diameter than the actual nut. This locks the nut in place by squeezing the nylon firmly around the bolt when tightened. Unlike a standard locking washer, the Nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened. The nuts are zinc-plated for increased resistance to corrosion. Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so. APPLICATION: Where a permanent fastening is required and loosening must be prevented by movement or vibration. Can be used on most bolt products including HT Bolts, Carriage Bolts, Threaded Rod etc. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers.Nyloc Nuts & Washers Zinc Plated M4 Forge Pack 50

The Stanley FatMax VDE Insulated Screwdrivers have a VDE insulated screwdriver tip, that is individually tested to 10,000 volts and guaranteed to 1,000 volts. The soft grip handle gives the perfect combination of great grip plus reduced fatigue and its large diameter offers greater torque needed for driving wood screws. The handle is moulded directly to the bar giving a virtually unbreakable bond. The heavy-duty plastic sheath running the length of the bar protects the user from live current. 10 Piece Set: 3 x Parallel : 2.5mm x 50mm, 3.5mm x 75mm, 5.5 mm x 150mm. 3 x Phillips: PH0 x 75mm , PH1 x 100mm, PH2 x 125mm. 3 x Pozidriv: PZ0 x 75mm, PZ1 x 100mm, PZ2 x 125mm. 1 x Voltage Tester.