Spannungswandler DC/AC von 12 V auf 230 V - 150 W

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.

Kurzinfo: TomTom Fast Multi-Charger - Netzteil - Pkw - 3 Ausgabeanschlussstellen (Zigarettenanzünden, USB) - für GO 51, 5200, 61, 610, 6200, Start 42, 52, 62, TRUCKER 500, 5000, 6000, VIA 52, 62, VIO Gruppe Netzgeräte & Batterien/Akkus Hersteller TomTom Hersteller Art. Nr. 9UUC.001.24 Modell Fast Multi-Charger EAN/UPC 0636926084802 Produktbeschreibung: TomTom Fast Multi-Charger - Netzteil - Pkw Produkttyp Netzteil - Pkw Ausgangsanschlusstyp Zigarettenanzünden, USB Entwickelt für GO 1000, 1005, 40, 400, 50, 500, 5000, 51, 510, 5100, 520, 5200, 530, 540, 550, 60, 600, 6000, 61, 610, 6100, 6200, 630, 730, 740, 750, 820, 825, 930, 940, 950, RIDER 40, 400, Start 40, 42, 50, 52, 60, 62, TRUCKER 500, 5000, 6000, VIA 125, 130, 135, 52, 62, VIO Ausführliche Details Allgemein Produkttyp Netzteil - Pkw Stromversorgungsgerät Eingangsanschlüsse Pkw-Zigarettenanzünder Eingangsstecker Menge 1 Ausgabeanschlussstellen Gesamt 3 : Pkw-Zigarettenanzünder, USB Typ A, 4-polig (nur Stromversorgung) Merkmale LED-Anzeige

Specification:Product Name: Steering Wheel CoverMaterial: PU LeatherColor: Black / Red+BlackMatching Steering Wheel Diameter: 14.57 (37CM) -15 (38CM)Placement on Vehicle: FrontQty: 1PCSGross Weight: Around 0.7kgFeatures:1. Fashion Sport Design.2. Skid-proof with the mixture of plain.3. Massage your palm to relieve drive fatigue.4. No distortion, No fade and No problem under extreme temperatures.5. Imitation material stitching.Fitments:for Toyota/Honda/Nissan/Mazda 37-38CM(Please Compare The Steering Wheel Cover With Your Original One Before Purchasing!)Package Included:1 x Car Steering Wheel Cover

Super Power Loud Audio square design Speaker Tweeter for Car Auto a pair

Hauptmerkmale Merkmale Kabellänge 1 m Anschluss 1 3.5mm Anschluss 2 3.5mm Steckverbinder 1 Geschlecht Männlich Steckverbinder 2 Geschlecht Männlich Produktfarbe Schwarz, Silber Anschluss1 Formfaktor Gerade Anschluss2 Formfaktor Gerade

Kurzinfo: Brodit ProClip Angled mount - Befestigungsklammer(n) - Schwarz Gruppe Zubehör Hersteller Brodit Hersteller Art. Nr. 853813 Modell ProClip Angled mount EAN/UPC 7320288538136 Produktbeschreibung: Brodit ProClip Angled mount - Befestigungsklammer(n) Produkttyp Befestigungsklammer(n) Produktmaterial ABS-Kunststoff Ausführliche Details Allgemein Produkttyp Befestigungsklammer(n) Produktmaterial ABS-Kunststoff Farbe Schwarz Verschiedenes Kompatible Fahrzeuge Audi Q7 / 2006 - 2009 Platzierung/Befestigung Armaturenbrett