A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting. All punches are sold singly without key, which should be ordered separately. Thread the punch onto the hexagonal screw and then pass the hexagonal screw through the hole. Position the die on top of the die nut and then screw the die nut onto the projecting hexagonal screw until it touches the metal sheet. Use a hexagonal key to turn the hexagonal screw. The screw will pull the punch through the metal and a hole will result. Please note these instructions apply to cutters up to 15 mm in size, for cutters 15 mm and over have a different configuration. Notably they have fewer components, in the larger cutters the thread is in the punch and thus there is no die nut.Size.12.7mm.Key Type. 6mm hexagonal wrench
1 x Übernachtung inkl. Frühstück vom Buffet, Begrüßungs-Prosecco am Abend im Restaurant, 4-Gang-Wahl-Menü, Aroma-Dampfbad (ca. 10 Minuten), individuelles Honig-Salz-Körperpeeling (ca. 15 Minuten), romantisches Blütenbad in der Partnerwhirlwanne bei Kerzenschein (ca. 25 Minuten), sinnlicher Fruchtcocktail oder Glas prickelnder Prosecco, Nutzung der 1500m² großen Wellnesslandschaft, Nutzung des Fitnessbereiches
The Britool combination spanners (Imperial) are forged in chrome vanadium steel and have a high chrome finish. The ring spanner end has a 12-point OGV® profile angled at 15° , maximising the contact surface with the nut for a longer lifetime. The open end is angled at 15° from the handle axis. ASME B 107-100The Britool BRIE113242B 12 piece combination spanner set includes the following spanners:1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8 and 15/16 AF.
Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applcations such a engraving, grooving, rebating and shallow morticing. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature. When deep cuts are required, more than one pass should be taken.Shank: 1/4in.The Trend CO12AX two flute router cutter is suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Ideal for use on softwoods, hardwoods, MDF, plywood and chipboard.All cutters have a bottom cut feature.Diameter: 8 mm.Cutting Depth: 25 mm.Shank Diameter: 1/4 in.