Held Polar II, gloves

Hexhantel gummiert Paar 40,0 kg

Ashima Disc Brake Adapter, PM-ISWhen you are converting Post Mount (PM) to International Standard (IS) discs, Ashima have the full range of adapters. These strong adapters should do the job, whatever you need. The Ashima range of adaptors are designed to allow fitment to most major brand OEM and aftermarket systems ,they are also suitable for both hydraulic and mechanical brakes.When selecting the correct adapter to accommodate an increase in disc size extra care should be taken to ensure the correct size is used. Ashima stated disk compatibility assume OEM front 160mm and rear 140mm disks. However in recent years, some OEMs fit oversized disks to font and/or rear, in such cases the brake calliper will have an adapter fitted. If this is the case, the OEM adapter will either need to be removed (Ashima recommends this) or you should select an adapter for the next standard disc size below your requirement.Example: If you have a PM brake calliper, PM forks and wish to up-grade the front disk form 160 to 203 and the rear form 140 to 180 you will require the following adapters:Front AU32 and Rear AU04.

To go further in all conditions, Furygan has developed a new winter glove. Leather is the traditional material of choice for upmarket gloves, however, it has now been brought into the futere by technology used by Furygan to protect against the cold and rain. Features
Blazer Sympatex is approved as PPE Outter shell: 100% goat leather Reflective inserts on the cuff External metacarpal protection shell Leather and foam reinforcements on the palm Furygan Sensitive Science: the forefingers and thumbs are equipped with a specific insert allowing for the use of touchescreen devices Waterproof and breathable sympatex membrane Thermal padding on the top of the hand. Thinsulate thermal padding on the palm (that traps and holds body heat, and allows moisture to escape). Thinner, technical high performing Thinsulate allows both protection against the cold and feeling of the levers Furygan "Dual Lining" - the inner lining on the back of the hand is made from high thermicity fabrics for optimal protection against the cold, while the lining on the palm of the hand is designed to preserve the feeling of the levers Anti-twist system: To ease fiting of the gloves even with wet hands A silicon insert inside of the cuff helps the glove not to slip and ensure a better fit on your sleeves Wrists and cuffs adjusters Longer cuff for better insulation

Features
Convertible Hook and Loop panels above the knee can be opened to expose air intakes Two zippered pockets for storage Polyester and nylon are combined with double stitch for a pant that is made to last Adjustable side cinches, snap buttons, and ratchet-style closure tailors to the unique build of every rider Abrasion-tolerant materials, durable construction, and full grain leather knee panels provide coverage in crucial areas Refined chassis for increased comfort and performance Interior hip pocket Comfort mesh liner Purpose built TPR Internal gaiter at boot Adjustable snap button ankle closure Reflective graphic accents YKK zippers Sublimated no fade graphics

The SP120 SR6 range is a high performance protective motorcycle jean, tested to the incoming en17092 standard (currently in draft). Our SP120 SR6 range has achieved the AAA rating (120KPH) for abrasion resistance. The SP120 SR6 Vintage is a straight fit, fashionable jean in a raw denim. We have optimised the ride height of the waist to ensure the best coverage, comfort and fit in a riding position. Fashion is achieved through the cut of the straight leg. A wick away mesh liner is included, as well as hip and knee armour pockets designed to fit Covec’s range of impact protectors. Ideal for hot and cold climates, Covec’s SR6 liner keeps you cool in the summer and warm in the winter. As with all our products, Bull-it jeans have a shower-resistant finish60% Covec SR6 liner coverage. Features
Covec SP120 SR6 liner (AAA achieved for abrasion) 12.5oz denim Straight cut 4 leg length options, Short 30 inches, Regular 32 inches, Long 34 inches and Extra Long 36 inches Waist sizes from 30 inches to 44 inches Mid height waist line, suitable for all riding styles Straight cut with lower leg inside or outside of boot option Hip and knee armour pockets for optional armour Wick away mesh for comfort, working with the Covec rib this creates increased airflow keeping you cool in warm weather and warm in cold weather shower-resistant finish all over Traditional 5 Pocket denim design Flat Bull-it branded rivets for the front pockets and YKK zips

The Cyclo Retainer Tool is compatible with all Cyclo Pro-series Removers. Its spring loaded to allow for single-handed operation and it secures the remover firmly during use, so you won't lose anything. With its workshop quality construction and interchangeable adaptors to fit bottom brackets and freewheels, this retainer tool from Cyclo Tools is a must-have for any cyclist's toolbox.