10Pcs Zucchini Seeds Green Plants Melon Vegetables Seeds

Vitax SBK Brushwood Killer is a selective weedkiller for brambles, nettles, dock, woody weeds, hardwood saplings and tree stumps in grass and other neglected non-crop areas. It does not kill grass. Its active ingredient is triclopyr, which is unusually effective on woody plants and is used for brush control in rights of way and defoliation of wooded areas. It is also effective against broadleaf weeds, particularly Creeping Charlie. Apply from May to October (June to August for woody weeds) when the soil is moist and weeds are actively growing. For tree stumps, the best time for treatment is Autumn or Winter, avoiding April, May and June when the sap is rising. Allow at least six weeks between application and replanting. Please note: This product is classed as an irritant, and care should be taken during use.1 x Vitax SBK Brushwood Killer 500ml

This Scan Hazard sign is made from 1mm thick, durable PVC. It's aggressive water-based adhesive enables the sign to easily stick on to and remain on any wall. It is printed using UV resistant inks, which resist fading. It is easy to read with clear instruction and illustration. Complies with BS5499 and/or ISO7010 design criteria where applicable.Helps limit company liability should an accident occur. The SCA1114 safety sign has the following specifications:Size: 200 x 300mmMessage: 'Caution Cleaning in progress'.

The Yale 1109 series replacement rim cylinders are for use with surface mounted locks, such as nightlatches, operating from a tailbar. They are used to provide key access from one side of a door and are suitable for doors 38mm to 57mm in thickness. The tailbar can be cut to suit the thickness of the door.This Yale 6KP1109PB Replacement Rim Cylinder comes in Polished Brass. Keyblank No.8 Supplied with six keysRim Finish: Polished Brass Pack: Visi

Peacock and Flower Print Removable Wall Tapestry

10/20 LED Christmas xmas Tree Toppers Decor

The Forge Tubular Mortice Latch for internal doors can be used with any lever latch handle, lever on rose handle or door knob. Supplied with screws and fitting instructions.Fitting Instructions:1. Mark a height line on door face and edge as well as a centre line on door edge.2. Drill a Ø23mm hole into door edge to accept the latch body, and a Ø19mm hole in door face for the spindle bar measuring from the door edge (43mm for 65mm latch, 60mm for 80mm latch).3. Fit latch and use a pencil to mark around the faceplate. Chisel out so the faceplate lies flush with door edge.4. Transfer the height line onto the door frame and mark a vertical line at half the door thickness from the door stop.5. Drill a Ø16mm hole, 10mm deep at this point and square out with a chisel. Position the striking plate over this hole, mark around with a pencil and chisel out to lie flush.Case size: 65mm (2.5 inch). Backset size: 44.5mm. Forend finish: Nickel. Supplied with matching screws, face plate and strike.