Gratis
Apoyo
To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.
Bluetooth® Headset & Intercom for Motorcycles & Motorbikes
Features
Bluetooth® 4.1 Bluetooth intercom Range up to 1.6 km (in open space) Four-way conference -Gegensprechanlage teleconference with participants over the intercom Together listening to music FM radio with station search and 10 station presets Bluetooth pairing for two mobile phones Voice announcements Easy operation by Turn /push button Bluetooth stereo headset for Bluetooth audio devices such as MP3 players or navigation systems Rich sound thanks to the integrated audio booster Advanced noise reduction Speed Dial Smartphone app for iPhone and Android Weatherproof Talk time: 12 hours Charging time: 3 hours Upgradeable Firmware
Supported Bluetooth® profiles
Headset profile (HSP) Hands-free profile (HFP) Advanced Audio Output Profile (A2DP) Profile for remote control of audio or video equipment (AVRCP)
Der Pfeil ist der neue High-Level Jet seine hat eine Elevate-Qualität der Konstruktion und es ist mit exklusiven elegant sportliche Grafik realisiert. Es ist ein echter Jet-Helm von zusammengesetzten Fasern hergestellt, garantiert höchste Sicherheit und Leichtigkeit. Der Helm zeichnet sich durch eine wesentliche und minimalistischen Stil. Fiberglas und Carbon-composite Monocoque voll Jet-Schale in zwei Größen Dunkle Sonnenblende Abnehmbar und waschbar innere Polsterung mit hoher Absorption Stoff Schwitzen und mesh-Stoff net mit Silberionen-Behandlung für eine effektive Bakterien-statische Aktion. Anti-Scratch Visier UV400 mit Kohlefaser-Unterstützung Kinnriemen mit mikrometrische SchnalleGRÖßEN XXS 54cm - XS 55cm - S 56 - M 57cm - kleine Muschel ML 58-59cm - 60cm L - XL 61cm - große Schale
Carbon Fiber Gear Shift Knob Head Cover For BMW 3 Series E90 E91 E92 E93Specifications:Material: ABS PlasticColor: Carbon Fiber PatternSize:4.8x9 cmFeatures:- Carbon Fiber Style and OEM Fit- Environmentally friendly Material, Not Change Color, Not Fade, Wear Resistance, Easy to Install and Clean.- High Quality Adhesive, not leave traces after tearing off, not damage the original car.Fitment:For BMW 3 Series E90 2005-2011For BMW 3 Series E91 2005-2012For BMW 3 Series E92 2006-2013For BMW 3 Series E93 2007-2013Package Included:1x Gear Shift Knob CoverInstallation Methods:1. Clean the location of the installation with rubbing alcohol before proceeding. (Make sure to remove any grease, wax or dust etc.)2. Please ensure that the product completely fits before proceeding with installation. (Note: If there any questions or if the product does not fit properly, please contact us.)3. Remove the high strength double-sided adhesive from the back of the plate. In the case of a relatively low temperature,heat installation location, and plate with a hair dryer or a heater on low setting.4. Carefully place the product in desired location and press down for about 1-2 minutes,(Note: Do not wash your car for 24-hour. The adhesive should be cured after 12-hour.)5. The installation is completed.Note:1. We provide clear pictures, measurements where possible. Please check as much as possible to make sure the item is the one that you need.2. Please allow 0.5-1 inch difference due to manual mea
Outer shell
water- & wind-repellent, breathable, elastic Softshell fabric (96% nylon, 4% elasthane)
Lining
mesh lining (100% polyester)
Fit/features
3 external pockets 2 inner pockets
Protection
EN 1621-1 CE-certified soft protectors at shoulders & elbows optional EN 1621-2 back protector sporty look (PU) soft foam cups on shoulders reflective piping Connecting zip
Specification:Color:BlackConnectivity:USB-CInput:12V/24V--2.5AOutput(Standard):5V--2AOutput(Dash)/:3.4~5v--3.5AMaterial:PC+Aluminum+ResinType 1: Car ChargerPackage Included:1 x ChargerNote:1.The colors may have different as the difference display, please understand.2.Please allow 1-3cm error due to manual measurement. Please make sure you do not mind before you bid.