Universal Car Phone Holder Adjustable 360 Degree Rotatable With Flexible Goose Neck

Outer garment
Fibretech 600D : soft & resistant Softshell panels 3 in 1
Membrane
Removable waterproof & breathable membrane
Isolation
120 g. full removable thermo-alu lining FixeD Hardmesh lining
Protection
Adjustable approved elbow protectors Approved shoulder protectors Pocket for approved back protector
Comfort
Body fit Back ADS ventilation system Zip & velcro rubber cuff fastening Front slider Reflective material Zip for connecting with trousers Double collar neoprene 2 outer pockets 3 inner pockets Waist fastening

Specification:Product Name: Hydraulic Rear Disc Brake CaliperColor: Gold and BlackMaterial: MetalHydraulic Cable Length: Approx 48cmDistance Between Master Cylinder Mount Holes (centre hole to centre hole): 40mm50mmNote:1. We provide clear pictures, measurements where possible.Please check as much as possible to make sure the item is the one that you need.2. Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm)3.Instruction is not included, professional installation is highly recommended.4. The compatibility is just for reference. Please compare the part No.with your original one before purchasingPackage Included:1 X Hydraulic Rear Disc Brake Caliper

To upgrade or downgrade the lining of your Arai helmet, you can order the lining in different strengths. To know the strength of your actual lining, please have a look on the label which is fastened on the lining in your helmet.
for Tour-X 4 Inner Lining (100% polyester) easily cleaned

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.

Features
HPFC Shell ECE 22.05 GR 950 ± 50 1 Shells
Visor
Quick Release System Scratch Resistant UV Resistant
Comfort
Removable and Washable Comfort Liner Breathable Hypoallergenic
Security
Quick Release Strap Reinforced Chin Strap Multi-Density EPS
Ventilation
Channeled Ports Top Vents
HPFC High Performance Fiberglass Composite is a carefully layered blend of an unique fiberglass weave and organic resin into a strong, ultra-light weight, but rigid shell that accepts an impact while dispersing energy for a safer ride. Quick Release System This (patent pending) system makes it simple to change your visor using no tools other than your hands. Built-in spring retention ensures a snug fit with no air gaps when the visor is closed.
Scratch Resistant Surface treatment of the visor against small abrasive impact.
UV Resistant Treatment of the visor with UV-free clear coating.
Removable and Washable Comfort Liner All LS2 helmets feature a fully removable and washable comfort liner so you can keep it as fresh as new. Our anatomically correct cheek pads are cut using LS2 s 3D Laser Technology for a perfect fit.
Hypoallergenic LS2 uses hypoallergenic technical fabrics that wick moisture to help keep you cool while you ride. Quick Release Strap The metal buckle attaches to a high quality safety strap. On the other strap is a ribbed plastic tab. Insert the ribbed plastic tab into the metal buckle. You ll hear a light "clicking" sound. Continue to slide it until you get a comfortable, snug fit. Pull the ribbon on the lever to release. For additional initial adjustment, use the metal slider buckle on the strap with the ribbed plastic tab to take up excess strap.

strapazierfähiges Rindnappaleder anilin Innenhand aus Känguruleder Schoeller®-Keprotec®-Verstärkungen vorgekrümmte Finger Stretcheinsätze zwischen den Fingern und an den Seiten Sturzpads atmungsaktiv