Makita HP2071F Percussion Drill + Light 240v

The DEWALT DCK206M2 Twin Pack, contains the following: 1 x 18 Volt DCH253 3 Mode SDS Hammer Drill that is ideal for drilling anchors and fixing holes into concrete, brick and masonry from 4mm to 24mm. The hammer drill has a rotation stop mode for light chiselling in plaster, tiles and render and an impact stop mode for rotary only drilling in wood and metal. It uses 4.0Ah 18 Volt Lithium Ion batteries to deliver high performance, long life and maximum runtime. No Load Speed: 0-1,200/min.Impact Rate: 0-4,500/min with 2.1 Joules.Capacity: Concrete: 24mm, Steel: 13mm, Wood: 26mm.Weight 3.1kg. 1 x 18 Volt DCD785 XR Compact Hammer Drill Driver has an ultra compact, lightweight design that allows it to be used in confined spaces, whilst the intelligent trigger design allows for total control of application. It has a two speed, all metal transmission for increased run time and a longer tool life. Chuck: 13mm Keyless.No Load Speed: 0-600/0-2,000/min.Impact Rate: 0-10,200/0-34,000/bpmTorque: 60Nm, 14 Settings.Capacity: Steel: 13mm, Masonry: 13mm, Wood: 38mm 1 x 10.8-18 Volt DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LEDindicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-Ion DEWALT Slide Pack 10.8, 14.4, and 18 Volt batteries.

User Benefits: Safety Paddle Switch. Electronic current limiter for overload protection. Soft start feature. Anti-restart function. Electric brake. Battery fuel gauge. Rubberised soft grip. Automatic Speed Control: Automatically changes the cutting speed according to load condition for optimum operation. High power motor. Equipped with Battery protection circuit: designed to protect the battery from damages due to overdischarge, high temperature or overload current. Kickback user protection: Shuts down the tool to protect the user if rotation speed suddenly slow down (e.g. kickback). Specification: Voltage: 18v Bore Diameter: 22.23mm Max Wheel Thickness: 6.4mm Noise Sound Pressure: 79 dB(A) Noise K Factor: 3 dB(A) Max Wheel Diameter: 125mm No Load Speed: 8,500/rpm Vibration K Factor: 1.5 m/sec² Vibration Surface Grinding: 6.0m/sec² Vibration Disc Sanding: 2.5m/sec² Net Weight: 2.6kg

The ABUS 70IB Series Marine grade padlocks have a solid brass body sealed in a protective vinyl cover with drainage channels to protect the cylinder against water and dirt. The shock absorbing vinyl casing prevents damage to polished surfaces. They have a precision pin tumbler cylinder with a stainless steel shackle and rust-free internal components for medium security requirements in severe weather and environmental conditions, ideal for securing to vehicles and boats. The inside parts are made of 100% rust-proof materials and have drainage grooves to carry off penetrating water. They also feature a double bolted shackle and a self locking cylinder. Codes ending LSC indicate a long shackle. Keyed alike available.ABUS 70IB/50HB80 50mm Brass Marine Padlock 80mm Stainless Shackle Keyed 6401

Magnetic screwdriver bit holder for 1/4in shank screwdriver bits.

Steel scale in hardened stainless steel with matt chrome-plated surface for anti-glare reading. Graduated in millimetres along the upper edge, and half millimetres on lower edge. The reverse side is blank. Manufactured in hardened stainless steel for extra durability, graduated in millimetres on the upper edge, half millimetres on the lower edge and decimetre figures in red with a tolerance ± 0.3mmLength: 1000mm (39 in)Width: 35mmThickness: 1.5mm

Easy to operate due to its intuitive keypad and large, illuminated display for the best readability. Has a robust IP54 design for tough jobsite conditions and all-round softgrip protection for a long lifetime. Offers optimum work results due to its high measuring accuracy.