These Forgefix Pozidriv Self-Tapping Screws have countersunk heads and are Zinc Plated for increased resistance to corrosion. They tap their own thread in to a pre-drilled pilot hole in sheet or solid material. They are single threaded to resist pull-out. APPLICATION:Ideal for use in many DIY, ironmongery, engineering, electrical and plumbing applications. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. Countersunk heads are designed to sink flush with substrates to leave a smooth surface finish.Self Tapping Screw Pozi Countersunk ZP 3/4 x 6 Box 200
E-Magnets Shallow pot magnets are low profile for applications where height is limited. They have a clearance hole through and a countersink on the magnetic face to accept a countersunk screw. Maximum operating temperature: 500°C.Material: AlnicoThe E-Magnets 827 Shallow Pot Magnet has the following specifications: Diameter: 29mm (1.1/8 inch). Height: 9mm (11/32 inch). Maximum Pull: 5kg (11 lb).
These heavy-duty toolboxes are ideal for use on the worksite, garage or around the home. They have a centre galvanised finish, this gives the toolbox a sturdy durable construction and is also rust-resistant, as are the two heavy-duty metal latches. They have a removable plastic tray which is ideal for smaller tools like screwdrivers, spanners etc, or tapes and fixings that can be found at a glance. The lid incorporates a saw groove for holding pipes and timber for cutting when there is no work bench available. The lid on has a honeycomb design to give it extra strength and durability, and the soft grip handle folds flat in to the lid when not in use.Dimensions: 662 x 293 x 222mm.
Faithfull heavy-duty crowbars, drop forged from high quality carbon steel hardened and tempered at both working ends. Ideal for levering heavy objects, wrecking work and digging, the pinch point end allows easy penetration when breaking hard ground.1 x Faithfull Chisel & Point Crowbar 28mm x 1.5m
The Knipex Pliers Wrench XL acts as pliers and a wrench in a single tool. This unique installation tool is suitable for opening widths up to 85mm (3.3/8in). It acts as an adjustable tightening tool and is ideal for large screw joints, with pressure-sensitive surfaces such as plastic, copper, brass, stainless steel and chrome. It is also excellent for gripping, holding, pressing and bending workpieces. It has smooth jaws, for damage free installation of quality union joints made from brass, red brass or stainless steel. The zero backlash jaw pressure prevents damage to edges of sensitive components. The tool allows adjustment at the touch of a button directly on the workpiece, The parallel jaws give a more solid grip. The construction gives infinite adjustment of all widths up to the specified maximum size. The pliers wrench ensures reliable catching of the hinge bolt with no unintentional shifting. The action of the jaws allows quick tightening and release of bolted connections using the ratchet principle. It has a lever transmission greater than 10:1 for strong gripping power. The pliers wrench is made from chrome vanadium electric steel, which is forged and oil-hardened. It conforms to DIN ISO 5743. Open-end wrenches with fixed opening widths are expensive, especially when used for large union joints. The KNIPEX Pliers Wrench XL, with its adjustable jaw offers enormous savings potential. Specifications: Capacity: 85mm (3.3/8in).Length: 400mm.Adjustment positions: 25.
Monument Tap Reseating Tool 1/2 inch re-cuts the seats of worn taps or stopcocks without disconnection from the pipework.Tapered cones screw into the top of the tap body, provided the tap body is threaded to the top. For taps with recessed threads in the body, use the parallel bush series. Cutters are case hardened. The feedscrew allows fine adjustment to the cutter. All parts are interchangeable. Fits old series 1/2 in BS1010 flat seats. Complete with 17 and 19mm (11/16 in and 3/4 in ) flat cutters and a tapered cone.
