Gratis
Apoyo
The Union JL22 StrongBOLT Euro Profile Mortice Sashlock is ideal for timber doors hinged on the left or right and suitable for doors up to 54mm thick. It is designed for use with an Euro profile cylinder. The deadbolt is locked or unlocked by key or cylinder turn, and measures 14mm for secure positive deadlocking. The JL22 StrongBolt Sashlock has hardened steel pins to give increased resistance to sawing attacks. The chamfered bolt design increases the performance of the lock under side load testing. The JL22 Sashlock has an easily reversible radius latch, that uses the unique Union SwitchLatch technology, requiring no tools for easier, quicker installation. The sashlock can be installed into many UK mortices without the need for additional carpentry or spoiling the edge of the door. A radius plastic inner allows easy installation and a gives a professional finish, whilst the anti-rattle adjustable strike allows on-site, fine tuning. Case: Steel, red powder coated.Face Plate: Supplied with square face plate which covers a radius inner forend.Latch Bolt: Zinc.Follower: Sintered Steel.Rebate Kit: 2200REB 13mm.Keying Groups: Supplied to differ or to pass/keyed alike.Supplied with 2 steel nickel plated keys. Tested to BS EN 12209:2003.Forend: Stainless Steel. Case Size: 81mm x 110mm (3.0in). Backset: 57mm. This is the measurement from the edge of the door to the centre of the keyhole. Centre: 47.5mm. This is the measurement from the centre of the follower, which operates the handles, to the centre of the keyhole.
This Scan Safety sign is made from 1mm thick, durable PVC. Its aggressive water-based adhesive enables the sign to easily stick on to and remain on any wall. It is printed using UV resistant inks, which resist fading. It is easy to read with clear writing and illustration. Complies with BS5499 and/or ISO7010 design criteria where applicable. The SCA1607 safety sign has the following specifications:Size: 200 x 300mmMessage: 'Notice Concealed CCTV cameras operate on these premises'.
A pack of two Forge traditional Spring Door Stops for wall mounting at low level. Supplied with fittings and fitting instructions.Fitting Instructions:1.Remove fixing plate from spring and screw to skirting at desired position.2. Place spring back against base and turn clockwise so that the spring is rethreaded into the base. N.B. Additional fixings may be required for fitting to solid or hollow walls.The FGEDSSPRICH Door Stops have a long lasting chrome finish, with a rubber cap to prevent marking and damage to the door surface.
The Faithfull Bottle Jack is high quality and fitted with a unique overload protection system and large base to provide added stability. All stress points are reinforced for durability, and a heat treated extension screw with a serrated saddle provides a generous lifting area, a secure grip and can be adjusted for either a low pickup point or a maximum lift height. The Bottle Jack is supplied with a two piece handle and manufactured to EN 1494 specifications. This jack is for temporarily lifting vehicles only. Always use proper rated capacity axle stands for the vehicle after jacking.The FAIAUJACBOT4 Bottle Jack has the following specifications: Capacity: 4 Tonnes. Minimum height: 194mm. Lifting height: 118mm. Adjusting height: 60mm.
Unisex M26 Bluetooth R-Watch SMS Anti Lost Smart Sport Watch For Android Smart Watch
Halloween Ghost Biscuit Mold Cake Mold Stainless Steel
