Einhell TE-CD18TI 18v Power-X-Change Twin Pack 1.5Ah Kit

Llave de amoladora angular Llave de máquina de corte ajustable Llave de amoladora de tuerca de seguridad ajustable Llave de pasador ajustable Llave de amoladora Llave ajustable

20 Unids Mini Tamaño 4x5mm Tierra Rara Neodimio Magnety Fuerte-magnético para Whiteboard Refrigerador DIY Artesanía Ciencia y Oficina uso

The band clamp is suitable for assemblies made of wood, plastics and non-ferrous metals, but it can also be used with ferrous metals when firm all-round clamping which will not damage or distort the work is required. Because the tape is tightened evenly from both sides, pressure is uniformly distributed all round or at each corner, thereby preventing distortion on one side. Self locking occurs automatically as the strap is tightened. This ensures consistent tension, which is maintained until the strap is released. The Vario-angle adapt automatically and infinitely variably to any angle from 60° to 180° . Clamping Range Up to 7mBand Width & Depth 25mm x 1mm Angle 60 / 80 DegreesWeight: 0.53Kg

The Knipex 26 21 200 bent long nose side cutters have long flat round jaws that are highly loadable, with elastic precision points with blades for hard wire diameter up to 2.2mm and medium wire diameter up to 3.2 mm. The cutting edges are separately induction hardened for durabilty and longer working life and are hardend to approximately 61HRC. The jaws are angled at 40° and are ideal for use on electronic or tight to reach areas on computers, circuitry, or motor vehicles applications. Knipex have used a good quality special tool steel material that is oil hardened. Dipped handles.The Knipex 26 22 200 bent long nose side cutters have Bi-material, 2-component handles for a more comfortable and positive grip. They have long flat round jaws that are highly loadable, with elastic precision points with blades for hard wire diameter up to 2.2mm and medium wire diameter up to 3.2 mm. The cutting edges are separately induction hardened for durabilty and longer working life and are hardend to approximately 61HRC. The jaws are angled at 40° and are ideal for use on electronic or tight to reach areas on computers, circuitry, or motor vehicles applications. Knipex have used a good quality special tool steel material that is oil hardened. Hard wire diameter: 2.2 mm.Medium wire diameter: 3.2 mm.Hardness approx. 61HRC.Length. 200 mm.

A slim open ended spanner designed, manufactured and tested in accordance with ISO 9002 with 15° angled heads. Chrome vanadium. Satin finish. DIN3110Size 24 x 27mm.Length 263mm

These Lindstrom Diagonal cutting nippers have an oval head. They are produced from high performance ball bearing steel which is black oxidised for increased durability. The numerically controlled machine grinding guarantees edge and angle accuracy and contact, which increases tool reliability and consistency. The edges are precision induction hardened to 63-65 HRC. The handles have a return spring and are sleeved. Ideal for wire harness work, and standard printed circuit board assembly. Oval heads are the most common type of nipper head. It combines strength and durability, can withstand and distribute the impact of cutting and is utilised in a myriad of applications.Length (A): 125mm (5 in). Blade length (B): 16mm (0.63 in). Head width (C): 16mm (0.63 in). Head depth (D): 8mm (0.31 in). Tip width: (F): 1.6mm (0.06 in). Cutting capacity: 0.4-2.0mm. Cutting edge: Micro-bevel. The Micro-Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area. Because of its design, it has a wide cutting range and variety of uses.