Boho Dream Catcher Handmade Gift Wall Hanging Decor Art Ornament Craft Bead Feather For Kids Bedroom Wedding Festival Lightinthebox

The RIDGID Strap Wrenches are best for any polished pipe. They have a sturdy, cast-iron housing with an I-beam handle and a strong, woven nylon strap that gives a tight grip. Two models available with special strap for plastic pipe.RIDGID No.2 Strap Wrench Handle Length: 300mm (11.3/4in).Strap Length: 760mm (30in).Strap Width: 30mm (1.1/8in).Rated Pipe Capacity: 50mm (2in).Actual O.D. Capacity: 135mm (5.1/2in).Weight: 0.8kg. Rated Pipe Capacity is the nominal diameter that can be correctly tightened.Actual O.D. Capacity is the actual O.D. that strap can accommodate.

The ALM Manufacturing Chainsaw Chain Oil contains a unique formula of modern extreme pressure additives that provide superb lubrication, reduced chain and bar wear and improved fuel economy. Blended and bottled in the UK. Size: 1 litre.

The Bahco S4RM ratcheting spanners are made from top quality forged steel, nickel which is then chrome-plated in a matt-finish for a smooth and secure grip. Easy to use, these spanners simply grip the nut or bolt being removed or replaced, the ratcheting spanner heads are sized either side of each spanner for the desired size of nut or bolt, then just push the direction lever to remove or replace the nut or bolt with ratchet action. They are an ideal option for motor mechanics, motor cycle repairs etc., as these spanners can be used in awkward places and minimal movement action is required to use them.This ratcheting set comprises 3 spanners covering 12 sizes is supplied in a fabric carry case with belt loop for easy transportation and storage. Sizes: 8 x 9 x 10 x 11mm, 12 x 13 x 14 x 15mm and 16 x 17 x 18 x 19mm.

Fisco Combination Square set for use outside and inside as a try square, mitre square, depth and marking gauge. It has a lightweight zinc stock and the rule has ground edges and ends. The centre head enables the accurate location and marking of the centre of circular items. The graduated protractor head can be turned through 360° for measuring and constructing angles. Size: 300mm/12in.

Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 3.1 Length 90 28° Collation AngleSKU S310R90 Profile RING Finish BRIGHT Description STICK NAIL 3.10-90 RING 2M Qty per box 2000Will also fit the N80SB, FW28WW-E, N100S

Theme:Mandala,Bohemian Theme; Style:Classic; Material:Polyester; Features:Adorable,Machine wash; Shipping Weight:0.325; Net Weight:0.000; Listing Date:11/18/2020; Production mode:Self-produce; Size:25251