Gratis
Apoyo
Beschreibung PROFI-Metall-Kabeltrommel 285mmØ 25 m schwere Gummischlauchleitung H07RN-F 3G2,5 mit Schutzkontaktstecker 3 Einbausteckdosen 230V / 16A mit Klappdeckel abgesichert durch Thermoschutzschalter Doppelrohrgestell mit geformtem Haltegriff und Sterngriffbremse 230V / 16A / max. 3500W entspricht BGI608 / K2 (BGI600) - Gewerbe, Baustelle IP44 - Technische Daten: Anschlusstyp A (bzw. Eingänge): Schutzkontakt-Stecker Anschlusstyp B (bzw. Ausgänge): Schutzkontakt-Kupplung Einsatzort: Außenbereich Kabel-Typ nach DIN/VDE: H07RN-F 3G 2,5 mm² Kabelfarbe: Schwarz Kabellänge: 25 m Kabeltrommel-Typ (Kategorisierung): Kabeltrommel Material (LOV): Metall Nenn-Eingangsspannung: 230 V Steckdosen-Anzahl: 3 Stecker-Ausführung: gerade Trommel-Durchmesser: 285 mm
The Irwin Metric HSS Cobalt Drill Bits are perfect for drilling stainless steel and other high alloys. Their 135° split point grinding ensures perfect centring and reduced drilling pressure. An industrial quality ground flute ensures high accuracy drilling and fast removal of chips. The drill bit body is manufactured from high quality HSS steel containing 5% Cobalt (Co). The added 5% Cobalt improves the red hardness (heat resistance) of the drill bit and results in significantly extended life. It has an attractive golden tempered surface finish.Diameter: 2.5mm.Working Length: 30mm.Overall Length: 57mm. Pack of 2.
features pre-wired cord with a plug to install in your electrical socket, a output socket to plug your appliance, and the LED display shows current temperature and start/stop temperature. This device is fairly simple to set up and adjust, switch to heating or cooling mode freely. It is very accurate in keeping the temperature at the desired level. Plug and play design, easy to use. It is suitable for freezer, green house, dog house,incubators, etc. Features: Show the measured temperature, start temperature and stop temperature at the same time. Digital tube LED display for clear readings, 4 buttons for easy operation. Pre-wired cord with a plug, plug and play design for convenient use. Heating/refrigeration modes, users can set the start/stop temperature freely. Temperature measuring range: -9C~99C; resolution: 0.1C. Also with temperature calibration function. Indicator light for indicating working status. Suitable for a wide range of applications, such as fish tank, floor heating, green house, etc. Note: This controller can not be used with air conditioner and compressor.
Beschreibung:Drillpro Sanding Belt Adapter Changed 115/125 Angle Grinder into Sander Sanding MachinePassend für 115 oder 125 WinkelschleiferSpezifikation:Adapter: M14Input power: 800W MaxGürtelgröße: 15 mm x 452 mmSuitable for 115/125mm electric angle grinder with M14 thread spindleHinweis: elektrische grinder ist nicht enthaltenEigenschaften:-Konvertieren Sie Ihren Winkelschleifer in einer Minute zum Bandschleifer-Slide switch with lock on-Ergonomisches Design, Griff perfekt und einfach zu steuern-6 levels variable speed control-Auswechselbare Arbeitsköpfe mit der Funktion von Schleifer und Schleifer-Head swivels 180 degrees up and down- Leichter Aluminiumkörper-Easy to install beltsLieferinhalt:3 x Arbeitsarm1 x Sanding belt head3 x Schleifband1 x Adapter1 x Stangenabdeckung1 x Wrench1 x Entstaubungsrohr1 x ScrewMehr Details:
Hauptmerkmale Funktionen Anzahl der bits 1 Schaftgröße 25,4 / 2 mm (1 / 5,10cm (2"") ) Material Stahl Verpackungsinformation Tragetasche Nicht Gewicht & Abmessungen Länge 4,2 cm Gewicht 112 g
