A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel punch.Size 4.0mm (5/32 in)
Hand Cut File for filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work on high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Double cut on both sides - with one safe edge (a safe edge permits work in corners). Parallel sides but slightly tapered in thickness. Smooth Cut: Approx 62 teeth per 25mm (Fine).Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size 300mm (12in)Cut: hand bastard.Tanged.
Evolution's Electric Disc Cutter easily cuts Concrete, Stone, Brick, and Paving, even reinforced concrete, with the supplied diamond blade.The powerful 2400W motor makes easy work of the most robust materials and because it is electric there are no harmful fumes, making it ideal for work in enclosed areas.The ergonomic support handles are ideally positioned for perfect balance when cutting and the spindle lock mechanism means blade replacement is quick and simple.Technical Specifications:Motor: 2400WSpeed: 5000/minDisc Diameter: 305mmDisc Thickness: 2.0mmBore Diameter: 20 / 22mmDisc Weight: 1.78kgMax Cutting Depth: 100mmMachine Weight: 9.5kgProduct Dimensions: 464x575x390mmRecommended Maximum Duty Cycle: 20minsSound Pressure Level (Under Load): 102.4dB(A)Vibration Level: 4.8m/s2Gross Weight: 11.82kgIncludes:Dust Extraction PortSpannerOperator's Manual1 x Blade
Jubilee® clips are Kite marked to BS5315 (1991) and the company is licensed to ISO 9001. Made from mild steel, zinc protected and used for fixing flexible rubber hoses, metal tubes etc.Size 6XAdjustment . 120 - 150mmAdjustment. 4.3/4 - 5.7/8in
Hammerite "Direct to Rust" Metal Paint can be painted directly onto rusty surfaces and, thanks to its special 3-in-1 formula, there is no need to use a primer or undercoat...saving you precious time! It forms a superior barrier that not only seals out moisture, but also gives long-lasting protection, both inside and outside. Touch dry in an hour, Hammerite is corrosion-resistant and is suitable for use on a wide range of exterior metal including gates, railings, drainpipes, guttering and garden furniture. Two coats are required and protects up to 5 years. Specification: Colour : Red Finish : Smooth Size : 400ml Coverage : 0.5m²/L
