Saison:Toutes les Saisons; Artisanat:Imprimé; Remarque:Lavage en machine délicat à basse température, ne pas javelliser, ne pas nettoyer à sec,Lavage à machine, sans blanchir, repassage chaud; Type:Couvertures et Jetés; Matière:Toison Flanelle; Dimension:130100/150200/180200/200230; Motif:Géométrique,Imprime; Caractéristiques:Épaissir,Super Doux,Confortable,Réchauffeur; Poids net:0.85/1.6/2/2.5; Date de l'annonce:01/11/2023; Mode de production:Auto-produit
The Union StrongBOLT Mortice Bathroom Locks feature an easily reversible radius latch that uses the unique UNION SwitchLatch technology, meaning that the latch can be reversed without the need for tools. The anti-rattle adjustable strike enables on site fine tuning. The plastic splinter guard and radius inner forend allows easy installation and a professional finish. The lock has a chamfered bolt design to increase its performance under side load testing and makes drilling attack more difficult. Anti-pick and keyhole protection prevents forced entry by picking, and hardened steel pins provide resistance to attack from sawing. The 14mm deadbolt provides secure positive deadlocking and additional resistance against attack. It can be locked or unlocked by the cylinder from either sideThe Union Mortice Bathroom locks can be installed in the many UK mortices without the need for additional carpentry or spoiling the edge of the door.Forend finish: Polished brass. Case size: 68 x 109.6mm. Backset: 45mm. This is the measurement from the edge of the door to the centre of the keyhole.Centre: 57mm. This is the measurement from the centre of the follower, which operates the handles, to the centre of the keyhole.
This Forge classic Backplate Handle has a scroll lever design. The sprung handle has a lasting finish and is lacquered to prevent discolouration during use. Ideal for internal or external use these handles have been tested for corrosion resistance and cycle tested beyond 120,000 uses. Screws Included. Fitting Instructions:1. Place the spindle bar through an existing tubular latch or lock and position one handle over the spindle bar. Ensuring the handle is square, mark the screw hole positions with a bradawl.2. Drill Ø2mm pilot holes and reposition the handle before securing using the wood screws provided.3. If fitting Bathroom handles, now insert the bathroom spindle bar through the deadbolt hole of the lock from the outside of the door and place the thumbturn onto the spindle bar. Tighten the grubscrew on the underside with the hex key provided.Designed to be used with any tubular mortice latch. Backplate Size: 102 x 40mm.Finish: Victorian Brass.