Bahco S910 1/4in and 1/2in Drive Socket Set 91 Piece

The R.S.T. Pole Sander provides an easy and efficient way of sanding the joints between plasterboards on a ceiling after they have been filled. A swivel head is attached to a wooden pole via a metal thread, and allows easier access into corners. The sander has a soft rubber pad and to keep the the abrasive secured, it has metal clamps. Other poles are available.

A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel punch.Size 4.0mm (5/32 in)

Master Lock V Line brass padlocks are a complete range of day-to-day commercial padlocks available to purchase keyed alike or keyed to differ. They have a solid brass body and cylinder to provide extra resistance against the elements. The case hardened shackle resists sawing and filing and the pin tumbler cylinder provides resistance against picking. Supplied with 2 keys and a Lifetime Warranty against mechanical failure. Suggested Uses: Lockers, trunks, cupboards, sheds, residential gates and storage units.The Master Lock 4130KA-243 has the following specifications: 30mm brass padlock - 14mm case hardened steel shackle, 5mm diameter - 3-pins - keyed alike

The Henry Squire HLS50S High Security Lockset with an integral lock and pivoting hasp providing formidable resistance against attack and corrosion. It provides an integrated solution for securing vans, gates, doors, garages and other high risk areas. The lock body is made from solid hardened steel and the hasp is made of a special cast material. Hardened boron alloy steel shackle - fully protected. 6-pin tumbler mechanism giving over 250,000 key differs. Rekeyable. CEN Graded. Available keyed alike and master keyed. Available keyed alike and master keyed. CRIMESTOPPERS supported. Lock Body: 50.0mm.Lock Body Thickness: 26.0mm.Shackle Diameter: 10.0mm. Hasp Length: 150mm.Hasp Width: 68mm.Hasp Thickness: 16.0mm.

The DEWALT DCK206M2 Twin Pack, contains the following: 1 x 18 Volt DCH253 3 Mode SDS Hammer Drill that is ideal for drilling anchors and fixing holes into concrete, brick and masonry from 4mm to 24mm. The hammer drill has a rotation stop mode for light chiselling in plaster, tiles and render and an impact stop mode for rotary only drilling in wood and metal. It uses 4.0Ah 18 Volt Lithium Ion batteries to deliver high performance, long life and maximum runtime. No Load Speed: 0-1,200/min.Impact Rate: 0-4,500/min with 2.1 Joules.Capacity: Concrete: 24mm, Steel: 13mm, Wood: 26mm.Weight 3.1kg. 1 x 18 Volt DCD785 XR Compact Hammer Drill Driver has an ultra compact, lightweight design that allows it to be used in confined spaces, whilst the intelligent trigger design allows for total control of application. It has a two speed, all metal transmission for increased run time and a longer tool life. Chuck: 13mm Keyless.No Load Speed: 0-600/0-2,000/min.Impact Rate: 0-10,200/0-34,000/bpmTorque: 60Nm, 14 Settings.Capacity: Steel: 13mm, Masonry: 13mm, Wood: 38mm 1 x 10.8-18 Volt DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LEDindicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-Ion DEWALT Slide Pack 10.8, 14.4, and 18 Volt batteries.

These Britool screwdrivers have a bi material ergonomic comfortable and effective handle. In addition, they have a round chrome plated blade in chrome vanadium steel each with a sand blasted tip. The 8 piece Britool BRIE160907B screwdriver set includes 2 x Parallel slotted screwdrivers 3x50 and 4x100mm2 x Flared slotted screwdrivers 5.5x125 and 6.6x150mm2 x Pozidriv screwdrivers PZ1x100 and PZ2x125mm2 x Phillips screwdivers PH1x100mm and PH2X125mm