Irwin Weldtec Circular Saw Blade 190 x 30mm x 18T ATB

3 Position ratchet allows you to work in tight areas. Compact, clear screwguide holds and guides screws in correct position. Powerful magnet holds both bit and screw in place. 12 x 25 mm bits consisting of; Slotted 3 mm, 5 mm, 6 mm, 7 mm. Crosspoint PH0, PH1, PH2, PH3, Hex 4 mm, 5 mm, Star T10, T20.

The 9529 Flat Bit has a positive cutting angle which drills holes twice as fast and lasts three times longer than a conventional bit. The winged shoulders enable the bit to first cut the wood and then remove the material from the centre section, ensuring a smooth finish and superior swarf clearance.Size: 20mm.

These Forgefix ForgeFast Wood Screws have a universally accepted, Pozi compatible drive. They have 6 underhead lobes for improved countersinking and reduced surface dust, and reinforced countersunk necks which improve holding power. The screws have an anti-friction thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber and improved drawing strength. The thread is serrated for improved pull-out and reduced torque when inserting the screw. The double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel. The screws have a 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours. The screws are suitable for interior use.Size: 4.5 x 70 mm.Box quantity: 100.

Beschreibung HighbondAnker Der zugzonentaugliche Verbundanker besteht aus den Ankerstangen FHB II-A L (lange Ausführung) und FHB II-A S (kurze Ausführung) in Verbindung mit Injektionsmörtel FIS HB oder alternativ Mörtelpatrone FHB II-P bzw. FHB II-PF. Der Mörtel verbindet die Ankerstange vollflächig mit der Bohrlochwand und dichtet das Bohrloch ab. Die Mörtelpatronen FHB II-P und der Injektionsmörtel FIS HB enthalten hochfesten Vinylestermörtel. Die Mörtelpatrone FHB II-PF enthält schnellbindenden Vinylestermörtel mit einer Aushärtezeit von z. B. nur 2 Min. > 20 °C. Bei der Verarbeitung mit Injektions-Mörtel FIS HB 345 S ist eine spezielle Auspresspistole zu verwenden (siehe Seite 159/160). Diese vermischt und aktiviert beide Mörtelkomponenten im Statikmischer direkt beim Auspressen. Angebrochene Kartuschen können durch einfachen Statikmischerwechsel wiederverwendet werden. Ausführung Ankerstange FHB II-A A4 aus nichtrostendem Stahl der Korrosionswiderstandsklasse III, z. B. A4, für Anwendungen

Spezifikation: Markenname: HENGCHANGModellnummer: NF-1Spannung: 48VMenge: 1 Stück Paket beinhaltet: 1 x AdaptersteckerDetails Bilder:

The Byron GOL-001 LED Oval Bulkhead is energy efficient and provides natural looking white illumination. It is wall-mountable and has an integrated LED bulb, that is not replaceable with a lifetime of 25,000 hours. An A rated energy appliance that has an IP44 rating, providing protection from the intrusion of water.The Byron GOL-001-HW LED Oval Bulkhead has the following specification: Output: 5.5 Watt 550 Lumen.Colour: White.